H12SSL-CT

Print

Key Features

1. Single AMD EPYC™ 7003/7002 Series Processor
(The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)

2. 2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs

3. Expansion slots:
5 PCI-E 4.0 x16
2 PCI-E 4.0 x8
M.2 Interface: 2 PCI-E 4.0 x4
M.2 Form Factor: 2280, 22110
M.2 Key: M-key

4. 8 SATA3, Broadcom 3008 SAS3 (12 Gbps) controller for 8 SAS3 ports, 2 M.2

5. Dual 10GBase-T LAN via Broadcom BCM57416

6. ASPEED AST2500 BMC graphics

7. Up to 6 USB 3.0 ports
(4 rear + 2 via header)

8. 7 PWM 4-pin Fans with tachometer status monitoring

Note: Image above may show a varied configuration of optional parts. Please refer to parts list for standard parts included.

Links & Resources


	Tested Memory List


	Tested HDD List


	Tested M.2 List


	Tested AOC List


	Motherboard Manual


	Update Your BIOS


	IPMI Firmware


	Download the Latest Drivers and Utilities

	Download Driver CD

	OS Compatibility

Specifications


Product SKUs

MBD-H12SSL-CT	H12SSL-CT
MBD-H12SSL-CT-O	H12SSL-CT (Retail Pack)


Physical Stats

Form Factor	ATX
Dimensions	12" x 9.6" (30.5cm x 24.4cm)


Processor/Chipset

CPU	Single AMD EPYC™ 7003/7002 Series Processor (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer) Socket SP3
Cores	Up to 64 Cores
Chipset	System on Chip


System Memory

Memory Capacity	8 DIMM slots Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM 8-channel memory bus
Memory Type	DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes	8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

SATA	SATA3 (6 Gbps)
SAS	Broadcom 3008 SAS3 (12 Gbps) controller RAID 0, 1, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers	Dual 10GBase-T LAN via Broadcom BCM57416 1 Realtek RTL8211F PHY (dedicated IPMI)
VGA	ASPEED AST2500 BMC


Input / Output

SATA	8 SATA3 (6 Gbps) ports
SAS	8 SAS3 (12 Gbps) ports
LAN	Dual 10GBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port
USB	6 USB 3.0 ports (4 rear + 2 via header)
VGA	1 VGA port
Others	1 COM port (rear) 2 SATA DOM power connectors 1 TPM 2.0 header


Expansion Slots

PCI-Express	5 PCI-E 4.0 x16 2 PCI-E 4.0 x8

M.2	Interface: 2 PCI-E 4.0 x4 Form factor: 2280, 22110 Key: M-key


Chassis (Optimized for H12SSL-CT)

1U	SC813MFTQC-350CB2 SC813MFTQC-R407CB
2U	SC213BAC8-R1K23LPB SC216BE1C4-R1K23LPB SC825MBTQC-R802LPB SC825TQC-R802LPB SC826BE1C4-R1K23LPB SCLA26AC12-R920LP1
3U	SC835TQC-R802B SC836BE1C-R1K23B
Mid-Tower	SC732i-903B
Tower/4U	SC745BAC-R1K23B SC846BE1C-R1K23B


System BIOS

BIOS Type	AMI 256Mb SPI Flash EEPROM
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1


Management

Software	Super Doctor 5 Watch Dog NMI SUM IPMI 2.0, KVM with dedicated LAN
Power Configurations	ACPI Power Management Power-on mode control for AC power loss recovery


PC Health Monitoring

CPU	Monitors CPU Core Voltages, +3.3V, +5V, +5V standby, +3.3V standby CPU switching voltage regulator Supports system management utility VBAT
FAN	Up to 7-fan status tachometer monitoring Up to 7 4-pin fan headers Dual Cooling Zone Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 7x Fan connectors I²C Temperature Sensing Logic
LED	CPU / System Overheat LED
Other Features	Chassis Intrusion Detection Chassis Intrusion Header UID


Operating Environment / Compliance

Environmental Specifications	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Parts List

H12SSL-CT