 |
|
|
| |
 | | SSG-6029P-E1CR12L |
- SuperStorage 6029P-E1CR12L (Black)
|
| |
|
| CPU |
- Dual Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
3 UPI up to 10.4GT/s
- Support CPU TDP 70-205W
|
| Cores |
|
| Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
| |
|
| Memory Capacity |
- 16 DIMM slots
- Up to 4TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
| Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
| Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.
|
| |
|
| Chipset |
|
| SAS |
- SAS3 (12Gbps) via Broadcom 3008 AOC
- Broadcom 3008 controller
|
| SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
| Network Controllers |
- Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Video |
|
| |
|
| LAN |
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 4 USB 3.0 ports (rear)
- 1 Type A
|
| Video |
|
| Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
| |
|
| BIOS Type |
|
| |
|
| Software |
|
| |
|
| CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
| FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- Network activity LEDs
- System Information LED
- Power fail LED
|
| |
|
| PCI-Express |
- 3 PCI-E 3.0 x16 slot
- 4 PCI-E 3.0 x8 slots
- Slot 2 & 3 occupied by controller and JBOD expansion port
|
| | |
| | Hot-swap |
- 12 Hot-swap 3.5" SAS3/SATA3 drive bays
- 2 Hot-swap 2.5" SATA3 drive bays (rear)
|
| Optional |
|
| | |
| | SAS3 12Gb/s expander storage backplane, w/ 12x SAS3 3.5" drive slots |
| | |
| | Fans |
- 3 Hot-swap 8cm redundant PWM cooling fans
|
| | |
| | 1200W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 15-12A / 50-60Hz
- 200-240Vac / 8.5-7A / 50-60Hz
- 200-240Vdc / 8.5-7A (for CCC only)
|
| +12V |
- Max: 83A / Min: 0A (100-127Vac)
- Max: 100A / Min: 0A (200-240Vac)
- Max: 100A / Min: 0A (200-240Vdc)
|
| +5Vsb |
|
| Output Type |
- 19 Pairs Gold Finger Connector
|
| Certification |
  Titanium Level
[ Test Report ]
|
| | |
| | RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|  | |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X11DPH-T
CSE-826BE1C4-R1K23LPB |
1
1 |
Super X11DPH-T Motherboard
2U Chassis |
|
Add-on Card / Module
|
AOC-S3008L-L8E |
1
|
LSI 3008 based SAS3 HBA, 12Gb, 8 internal ports, 122HDD, Gen3 x8 Standard Low Profile |
|
Add-on Card / Module
|
AOM-SAS3-8I8E-LP |
1
|
8-port Mini SAS HD Int-to-Ext cable adapter w/ LP bracket,HF,RoHS/REACH |
|
Backplane
|
BPN-SAS3-826EL1-N4 |
1
|
12-port 2U SAS3 12Gbps single-expander backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD/SSD and 4x NVMe/SAS3/SATA3 storage devices |
|
Cable 1
|
CBL-SAST-0532 |
4
|
MINI SAS HD,12G,INT,50CM,30AWG |
|
Parts
|
MCP-220-82616-0N |
1
|
12G 2.5x2 Drive Kit w/ Status LED(216B/826B/417B/846X/847B) |
|
Parts
|
MCP-260-00042-0N |
1
|
STD I/O shield for X9 socket R server MB with Gasket. |
|
Heatsink / Retention
|
SNK-P0068PS |
1
|
2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
|
Heatsink / Retention
|
SNK-P0068PSC |
1
|
2U Passive CPU Heat Sink with a Side Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
|
FAN 1
|
FAN-0158L4 |
3
|
80x80x38 mm, 10.5K RPM, Optional Middle Cooling Fan for X10 2U Ultra and HFT Series Servers,RoHS/REACH |
|
Rear Window
|
MCP-240-82608-0N |
1
|
216B/826B LP rear window,RoHS/REACH,PBF |
|
Power Supply
|
PWS-1K23A-1R |
2
|
AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 360x76x40 mm,HF,RoHS/REACH |
|
|
|
| |
| | |
Part Number |
Qty |
Description |
| Converter Trays |
MCP-220-00118-0B
MCP-220-00043-0N |
-
- |
Black gen-5.5 tool-less 3.5-to-2.5 converter drive tray
Black hot-swap gen 4 3.5 to 2.5 HDD tray |
| Convert 2 Rear SATA to NVMe |
MCP-220-82619-0N
AOC-SLG3-2E4R-O
CBL-SAST-0849 |
1
1
2 |
2.5x2 NVMe Drive Kit for 216B/826B/417B/846X/847B,RoHS
LP, PCIe3 x8, 2 internal Mini-SAS HD port redriver NVMe card
MiniSAS HD source to OcuLink v 1.0,INT,PCIe,57CM,34AWG |
| 4 NVMe Drives Support |
AOC-SLG3-2E4R-O
CBL-SAST-0590
MCP-220-00116-0B |
2
4
4 |
NVMe AOC
Internal Mini-SAS HD cable for PCIe SSD NVMe, 12Gb/s, 70cm
3.5" to 2.5" NVMe drive tray |
| Cable |
CBL-SAST-0388L-02 |
1 |
Mini-SAS (iPASS) to 4-SATA Cable - To offer 2 SATADOM support on Motherboard |
| Global Services & Support |
OS4HR3/2/1
OSNBD3/2/1 |
-
- |
3/2/1-year onsite 24x7x4 service
3/2/1-year onsite NBD service |
| Software |
SFT-OOB-LIC •  |
1 |
OOB Management Package (per node license) |
| Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|
