H12DST-B (For A+ Server Only)
H12DST-B
Key Features
1. Dual AMD EPYC™ 7003/7002 Series Processors
(7003 Series Processor drop-in support requires BIOS version 2.0 or newer)
2. 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs
3. Expansion slots:
1 PCI-E 4.0 x16 Left Riser Slot
1 PCI-E 4.0 x16 Right Riser Slot
1 PCI-E 4.0 x24 Proprietary Slot
 (for Supermicro storage add-on card)
1 PCI-E 4.0 x16 SIOM LAN Networking Slot
M.2 Interface: 1 SATA/PCI-E 3.0 x4
M.2 Form Factor: 22110, 2280
M.2 Key: M-key
4. 6 SATA3, 1 M.2, 1 SuperDOM
5. Onboard LAN Provided by Realtek RTL8211F PHY
6. ASPEED AST2500 BMC graphics
7. Up to 2 USB 3.0 ports (Rear)
1 USB 2.0 port (Type A)
8. 2x 4-pin PWM Fans & Speed control

Note: Image above may show a varied configuration of optional parts. Please refer to parts list for standard parts included.
Specifications
Product SKUs
MBD-H12DST-B
  • H12DST-B (for server SKUs only)
 
Physical Stats
Form Factor
  • Proprietary BigTwin™
Dimensions
  • 6.8" x 18.86"
 
Processor/Chipset
CPU
  • Dual AMD EPYC™ 7003/7002 Series Processors
    (7003 Series Processor drop-in support requires BIOS version 2.0 or newer)
  • Socket SP3
Cores
  • Up to 64 Cores
Chipset
  • System on Chip
 
System Memory
Memory Capacity
  • 16 DIMM slots
  • Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs
  • 8-channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • SATA3 (6 Gbps)
IPMI
  • Support for Intelligent Platform Management Interface v. 2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Network Controllers
  • 1 PCI-E 4.0 x16 SIOM LAN Networking Slot
  • 1 Realtek RTL8211F PHY (dedicated IPMI)
VGA
  • ASPEED AST2500 BMC
 
Input / Output
SATA
  • 6 SATA3 (6 Gbps) ports
LAN
  • Provided via SIOM
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (2 rear)
  • 1 USB 2.0 port (Type A)
VGA
  • 1 VGA port
Others
  • 1 COM port (header)
  • 1 SuperDOM power connector
  • 1 TPM 1.2/2.0 header
 
Expansion Slots
PCI-Express
  • 1 PCI-E 4.0 x16 Left Riser Slot
  • 1 PCI-E 4.0 x16 Right Riser Slot
  • 1 PCI-E 4.0 x24 Proprietary Slot
    (for Supermicro storage add-on card)
  • 1 PCI-E 4.0 x16 SIOM LAN Networking Slot
M.2
  • Interface: 1 SATA/PCI-E 3.0 x4
  • Form Factor: 22110, 2280
  • Key: M-key
Chassis ( Optimized for H12DST-B)
2U
  • SC217BHQ+-R2K22BP
 
Server(s) (with H12DST-B)
Model(s)
 
System BIOS
BIOS Type
  • AMI 256Mb SPI Flash EEPROM
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 5.1
  • USB Keyboard Support
  • SMBIOS 3.1.1
 
Management
Software
Power Configurations
  • ACPI Power Management
  • Power-on mode control for AC power loss recovery
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.5V, +1.8V, +12V, +5V, +5V standby
  • CPU switching voltage regulator
FAN
  • Up to 2 fan status tachometer monitoring
  • Up to 2 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I²C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List
H12DST-B (For A+ Server Only)

Certain products may not be available in your region