Question
Does 5028R-E1CR12L (X10SRH-CLN4F) support PCIE NVMe SSD (like Intel SSD 750 HHHL AIC)?
Print
Answer
The mentioned server should support Intel PCIe Nvme 750 drives.
If you want to make this drive as Windows OS bootable, please change the following settings in BIOS.

1. BIOS >> Advanced >> PCIe/PCI/PnP Configuration and change the Device Option Rom Configure “UEFI mode” from Legacy on Riser card slot or PCIe slot.
2. Save and exit the BIOS.

3. During the post press F11 and select “UEFI: DVD-ROMxxxxxxxx” to start the installation. Some OS versions include built in drivers.

4. Reboot after OS installation, press F11 again and select “Windows Boot Manager” to load the OS.

It will be best to change the boot sequence in the BIOS if it is not in first boot device.
Select "Windows Boot Manager" as first boot device in the BIOS.
Was this FAQ helpful?
Enter Comments Below:
Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to .
Enter your email address below if you'd like technical support staff to reply:
Please type the Captcha (no space)
B 3 M X
FAQ ID:
24323
Related Category / Keyword:
Storage:
Solid State Drives (SSD)
Date Posted:
10/28/16
Code:
Find more questions
Still Need Support?
Having trouble finding what you're searching for? Contact our support team for further assistance.

Certain products may not be available in your region