 | |
 | | SYS-1018D-73MTF |
- SuperServer 1018D-73MTF (Black)
|
| |
|
| CPU |
- Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
|
| |
|
| Memory Capacity |
- 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) w/ RAID 0, 1
- SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
|
| SAS |
- SAS2 (6Gbps) via Broadcom 2308
- SW RAID 0, 1, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC with 10/100/1000Mbps
|
| Network Controllers |
- Intel® i210AT dual port GbE Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
|
| |
|
| SATA |
- 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
- SATA DOM Power Connector
|
| SAS |
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
|
| VGA |
|
| Serial Port / Header |
- 2x COM ports (1 rear, 1 header)
|
| |
|
| Voltage |
- Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Weight |
- Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
|
| PCI-Express |
- 1x PCI-E 3.0 x8 (in x16) Full-height slot
|
| | |
| | Hot-swap |
- 8x 2.5" Hot-swap SAS2/SATA3 HDD bays
|
| Peripheral Bay |
- Slim optical drive (optional)
|
| | |
| SAS2/SATA3 HDD Backplane
(SAS support requires optional SAS controller) |
| | |
| | Fans |
- 4x 40x28mm 4-pin PWM Cooling Fans
- Optional fans to cool add-on cards
|
| | |
| | 330W AC power supply w/ PFC |
| AC Voltage |
- 100-240 V, 50-60 Hz, 4.5 Amp max
|
| +5V |
|
| +5V standby |
|
| +12V |
- 27 Amp @ 100-180Vac,
31 Amp @ 180-240 Vac
|
| -12V |
|
| +3.3V |
|
| Certification |
Gold Certified
[ Test Report ]
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
| Software |
- IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| | |
| RoHS
|
- RoHS2 (2011/65/EU) Compliant
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
