![](/a_images/pixel.gif) | |
![](/a_images/boxes/line_yellow.gif) | AS-1021M-T2RV |
- A+ Server 1021M-T2RV (Silver)
|
AS-1021M-T2RB |
- A+ Server 1021M-T2RB (Black)
|
| |
![](/a_images/boxes/line_yellow.gif) | CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core AMD Opteron 2000 Series (Socket F) processors
- Single CPU configurations are not recommended
- HT3.0 Link support
|
Chipset |
- nVidia nForce MCP55 Pro
- NEC uPD720400
|
| |
![](/a_images/boxes/line_yellow.gif) | Memory Capacity |
- 8x 240-pin DIMM sockets support up to
64GB DDR2 800/667/533/400 MHz SDRAM
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
Memory Type |
- DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
![](/a_images/boxes/line_yellow.gif) | SATA |
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
IPMI |
|
Network Controllers |
- nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output
|
Graphics |
- ATI ES1000 graphics controller
|
Super I/O |
|
| |
![](/a_images/boxes/line_yellow.gif) | Serial ATA |
- Six SATA2 Ports
- Four SATA2 hard drives supported
|
IDE |
- Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
Floppy |
|
LAN |
|
USB |
- FUCI
- Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 2 Internal Headers
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 1 Fast UART 16550 serial port
- 1 header
|
| |
![](/a_images/boxes/line_yellow.gif) | BIOS Type |
- 8Mb Flash EEPROM with AMI® BIOS
- SST49LF080A BIOS Chip
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
|
|
![](/a_images/pixel.gif) |
![](/a_images/pixel.gif) | |
![](/a_images/boxes/line_yellow.gif) | Form Factor |
|
Model |
|
| |
![](/a_images/boxes/line_yellow.gif) | Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
| |
![](/a_images/boxes/line_yellow.gif) | Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
![](/a_images/boxes/line_yellow.gif) | Left Universal Slot |
- 1 PCI-express x8 Slot OR
- 1 64-bit 133MHz PCI-X slot
|
Right Universal Slot |
- 1 PCI-express x8 Slot OR
- 1 64-bit 133MHz PCI-X slot
|
| |
![](/a_images/boxes/line_yellow.gif) | Hot-swap |
- 4 x 3.5" Hot-swap SATA drive bays
|
| |
![](/a_images/boxes/line_yellow.gif) | 1U SATA / SAS Backplane w/ AMI 9071 chip |
| |
![](/a_images/boxes/line_yellow.gif) | DVD-ROM |
- Slim 8x DVD, 24x CD, DVD-ROM drive
|
| |
![](/a_images/boxes/line_yellow.gif) | Fans |
|
| |
![](/a_images/boxes/line_yellow.gif) | 650W AC power supply w/ PFC |
AC Voltage |
- 100 - 240V, 60-50Hz, 8-4 Amp
|
+5V standby |
|
+12V |
|
With Power Distributor |
- +5V: 25 Amp
- +3.3V: 12 Amp
- -12V: 0.6 Amp
|
| |
![](/a_images/boxes/line_yellow.gif) | CPU |
- Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT, Chipset
- CPU 4-Phase-switching voltage reulator
|
FAN |
- Total up to 5-fan status tachometer monitoring
- Up to five 3-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Support 3-pin fans with fan-speed control
- Low noise fan speed control
- Overheat backup fan connector
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
Other Features |
- Chassis Intrusion Header
- Chassis Intrusion Detection
|
| |
![](/a_images/boxes/line_yellow.gif) | RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|