 |
|
|
| |
 | | SYS-E403-9P-FN2T |
- SuperServer E403-9P-FN2T (Black)
|
| |
|
| CPU |
- Single Socket P (LGA 3647)
- 2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake-SP)‡
- Support CPU TDP 70-205W
|
| Cores |
|
| Note |
‡
BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R).
Operating Temperature: 0°C ~ 35°C (32°F ~ 95°F) for Cascade Lake-R CPUs above 165W TDP, please contact Supermicro Technical Support for additional information. |
| |
|
| Memory Capacity |
- 6 DIMM slots
- Up to 1.5TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
|
| Memory Type |
- 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
|
| |
|
| Chipset |
- System on Intel® C622 chipset
|
| SATA |
- Intel® C622 controller; RAID 0, 1, 5, 10
|
| Network Controllers |
- Dual 10GBase-T LAN with Intel® X722 + X557
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Video |
|
| |
|
| SATA |
|
| LAN |
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 4 USB 3.0 ports (front)
- 2 USB 2.0 ports (front)
|
| Video |
|
| Serial Port |
|
| SuperDOM |
- 2 SuperDOM (Disk on Module) ports with built-in power
|
| |
|
| BIOS Type |
|
| |
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
|
| |
| | Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Package |
- 26" (W) x 10.4" (H) x 16.4" (D)
|
| Weight |
- Gross Weight: 24 lbs (10.89 kg)
- Net Weight: 18 lbs (8.16 kg)
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- System Information LED
- Overheat LED
|
| |
|
| PCI-Express |
- 2 PCI-E 3.0 x16 (FHFL) slots or
- 2 PCI-E 3.0 x8, 1 PCI-E 3.0 x16 (FHFL) slots†
|
| Note |
†
See Manuals for settings on Expansion Card and BIOS |
| | |
| | Internal |
- 4 Internal 2.5" drive bays
|
| M.2 |
- M.2 Interface: PCI-E 3.0 x4 and SATA
- Form Factor: 2280, 22110
- Key: M-Key
- Double Height Connector
|
| | |
| | Fans |
- 3x 80x38mm PWM hot swap fans
|
| | |
| | 600W AC multi output power supply w/ PFC |
| AC Voltage |
- 100-240 V, 50-60 Hz, 7.5-3.1 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| +3.3V |
|
| Certification |
Gold Certified
[ Test Report ]
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
0°C ~ 45°C (32°F ~ 113°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|  | |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-MBD-X11SPW-TF
CSE-E403iF |
1
1 |
Super MBD-X11SPW-TF Motherboard
Black 2.5U Embedded Server Box W/O PWS |
|
Riser Card
|
AOM-SDW-B16X2-P |
1 |
AOM-SDW-B16X2, Dual PCIE x16 slot WIO Riser Card for Intel FlexRAN project,RoHS |
|
Cable 1
|
CBL-0082L |
2 |
Y split , big 4 pin to two RA SATA power extension 15cm, 18AWG |
|
Cable 2
|
CBL-0206L |
4 |
CBL-SAST-0641 / 4 / SATA,INT,ROUND,ST-RA,45CM,30AWG |
|
Cable 3
|
CBL-CUSB-0832 |
1 |
USB 3.0(F) Type A 2x to USB3.0 20pin,73CM,30AWG |
|
Cooling Fan
|
FAN-0200L4 |
3 |
80x80x38 mm, 13.5K RPM Cooling Fan for E403IF
|
|
Cooling Fan Accessory
|
MCP-320-40302-0N |
1 |
Fan bracket with extension cable for 3x 8038 hot-swap,E403
|
|
Heat Sink
|
SNK-P0071VS |
1 |
1U Proprietary Passive CPU Heat Sink (124 mm Long) for SYS-2029BZ-HNR Series Servers (X11 2U4N 3UPI Big Twin) |
|
Air Shroud 1
|
MCP-310-40301-0B |
1 |
Air shroud for CSE-E403iF+ X11SPW |
|
Power Supply
|
PWS-601-1H |
1 |
1U 600/680W MULTI OUTPUT PWS 80+ GOLD |
|
Part 1
|
MCP-260-00078-0B |
1 |
1U I/O shield for X11 Server MB with 5X5mm vent hole and EMI Gasket, Black |
|
*
Cable 4
|
CBL-0156L |
1 |
CBL,FRONT CNTL,16 TO 16 PIN,RA,RND TUBE,40CM,28AWG |
|
*
Tray
|
MCP-220-40301-0N |
4 |
Fixed HDD tray 4x 2.5in for CSE-E403iF |
|
*
Front Panel 1
|
FPB-FP826-D |
1 |
Front control board Dual color LED(FP826-D)forSC826,213,216,219
|
|
*
Front Panel 2
|
TB826 |
1 |
Front panel adaptor board (TB826) forSC826,213,216,219
|
|
*
Part 2
|
MCP-240-40301-0B |
1 |
Black riser card bracket 3x slot for WIO M, CSE-E403iF |
|
*
Part 3
|
MCP-260-40301-0B |
1 |
I/O Shield support 2x USB for CSE-E403iF |
Notes: - Parts with * come with the Chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|
|
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
| Network Card(s) |
AOC-SGP-i2
AOC-SGP-i4
AOC-STGN-i2S
AOC-STGF-i2S
AOC-STG-B4S
AOC-STGS-i2T
AOC-S25G-b2S
AOC-S25G-m2S |
-
-
-
-
-
-
-
- |
Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350-AM2
Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350
Standard Lp, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES
Standard Lp, 2x 10GbE SFP+, PCI-E x8, Intel X710-BM2
Standard Lp, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard Lp, 2x 10GbE RJ45, PCI-E x8, Intel X550-AT2
Standard LP, 2x 25GbE SFP28, PCI-E x8, Broadcom BCM57414
Standard LP, 2x 25GbE SFP28, PCI-E x8, Mellanox CX-4 LX |
Hide Parts List
|
|
|
|
