|
|
|
| |
| SYS-1029U-E1CR25M |
- SuperServer 1029U-E1CR25M (Black)
|
|
|
CPU |
- Dual Socket P (LGA 3647)
- 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
Dual UPI up to 10.4GT/s
- Support CPU TDP 70-205W
|
Cores |
|
Note |
‡
BIOS version 3.2
or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information. |
|
|
Memory Capacity |
- 24 DIMM slots
- Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
- Supports Intel® Optane™ DCPMM††
|
Memory Type |
- 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
- 2666 ECC DDR4 NVDIMM
|
Note |
† 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info.
|
| |
| Chipset |
|
SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
Network Connectivity |
- 2 25GbE SFP28 ports via AOC-URN4-M2TS-O (Mellanox ConnectX-4 Lx EN)
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
Graphics |
|
| |
| SAS |
- 10 SAS3 ports support via expander and storage Add-on Cards
|
LAN |
- 2 25GbE SFP28 ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 5 USB 3.0 ports
(2 rear, 2 front, 1 Type A)
|
Video |
- 2 VGA ports (1 rear, 1 onboard)
|
Serial Port |
|
|
|
BIOS Type |
|
|
|
Software |
|
Power Configurations |
|
|
|
CPU |
- Monitors for CPU Cores, Chipset Voltages, Memory.
- 4+1 Phase-switching voltage regulator
|
FAN |
- Fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for fan connectors
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Height |
|
Width |
|
Depth |
|
Weight |
- Net Weight: 26 lbs (11.8 kg)
- Gross Weight: 41 lbs (18.6 kg)
|
Available Color |
|
| |
| Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
|
|
PCI-Express |
- 2 PCI-E 3.0 x16 (Full-height, 10.5" L)
- 1 PCI-E 3.0 x8 (Low-profile)
- 1 PCI-E 3.0 x16 (internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| |
| Hot-swap |
- 10 Hot-swap 2.5" drives supported via expander
|
M.2 |
- 1 M.2 PCI-E 3.0 x4 M-Key NVMe or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional riser card (see optional parts list)
- 2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2
|
| | |
| Fans |
- 8 Heavy duty fans with optimal fan speed control
|
Air Shroud |
|
| |
| 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
AC Input |
- 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
|
+12V |
- Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 62.5A & Min: 0A (200Vac-240Vac)
|
12V SB |
|
Certification |
Platinum Level [ Test Report ]
|
| |
| RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X11DPU
CSE-119UTS-R751P-T |
1 1 |
Super X11DPU Motherboard
CSE-119UTS-R751P-T Chassis |
Add-on Card / Module
|
AOC-URN4-M2TS-P |
1 |
1U Ultra Riser 2-port 25GbE SFP28, based on Mellanox Connect |
Backplane
|
BPN-SAS3-116EL1 |
1 |
10-port 1U SAS3 12Gbps single-expander backplane, support up to 10x 2.5-inch SAS3/SATA3 HDD/SSD |
Cable 1
|
CBL-PWEX-0650 |
1 |
8 pin female to 2x RA(Right Angle) big 4 pin female power, 47/62CM, 18AWG,RoHS/REACH |
Cable 2
|
CBL-SAST-0532 |
2 |
MINI SAS HD,12G,INT,50CM,30AWG |
FAN 1
|
FAN-0101L4 |
8 |
40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808 |
Rear Window
|
MCP-240-81915-0N |
1 |
Rear window for SC819U, 119U tool-less chassis (m2TS) |
Air Shroud
|
MCP-310-81910-0N |
1 |
Plastic air shroud for SC819U, 119U (X11 24DIMM, left side) |
Air Shroud
|
MCP-310-81911-0N |
1 |
Plastic air shroud for SC819U, 119U (X11 24DIMM, right side) |
Riser Card
|
RSC-R1UW-2E16 |
1 |
1U LHS WIO Riser card with two PCI-E x16 slots |
Riser Card
|
RSC-R1UW-E8R |
1 |
1U RHS WIO Riser card with one PCI-E x8 slot |
Heatsink / Retention
|
SNK-P0067PS |
2 |
1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism |
*
Power Supply
|
PWS-751P-1R |
2 |
1U 750W Redundant Platinum Single Output Power Supply w/Pmbus W73.5xH40xL203mm,RoHS/REACH |
Notes: - Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|
|
|
|
| |
| |
Part Number |
Qty |
Description |
Add-on card for internal M.2 NVMe |
AOC-SLG3-2M2 |
1 |
Low Profile PCI-E x8 add-on card supports 2 PCI-E 3.0 x4 M-Key M.2 NVMe Modules |
Internal Drive Tray for Two 2.5" Drives
|
MCP-120-82916-0N CBL-PWEX-0650 CBL-0080L CBL-0484L Or CBL-SAST-0654 Or CBL-SAST-0948 |
1 1 2 2 1 1 |
Internal drive plate Supports Two 2.5" Drive, PCI slots Power cable for Two internal 2.5" drives SATA3 S-S Cable miniSAS(iPass) to 4 SATA Cable miniSAS HD to 4 SATA Cable
|
2 Internal M.2 slots (1 SATA, 1 NVMe)
|
RSC-UMR-8 & CBL-SAST-0538 |
1 |
1U Ultra RHS Riser Card with 1 PCIE/SATA Hybrid M.2 &1 PCIE X8
|
Storage Control Card and Cable(s) |
AOC-S3008L-L8e
AOC-S3008L-L8i
AOC-S3108L-H8iR
AOC-S3108L-H8iR-16DD
|
1
|
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 122HDD, HBA
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60 Std LP, 8 internal ports, 12Gb/s per port- Gen3, 16HDD, RAID 0, 1, 5, 6, 10, 50, 60
|
Compatible Networking Cables and Transceivers for System default Networking (AOC-URN4-m2TS) |
- |
1~2 |
Networking Cables and Transceivers Compatibility Matrix |
Network Card(s) |
AOC-SGP-i2/4
AOC-STGN-i1S/i2S
AOC-STGF-i2S
AOC-STG-i4S
AOC-STG-b4S
AOC-STG-i2T
AOC-STGS-i1/2T
AOC-STG-i4T
AOC-STG-i2
AOC-S25G-m2S
AOC-S40G-i2Q
More |
-
-
-
-
-
-
-
-
-
-
-
- |
Standard LP, 2/4x GbE RJ45, PCI-E x4, Intel i350
Standard LP, 1/2x 10GbE SFP+, PCI-E x8, Intel 82599EN
Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel XL710-BM2
Standard LP, 4x 10GbE SFP+, PCI-E x8, Intel XL710
Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540
Standard LP, 1/2x 10GbE RJ45, PCI-E x8, Intel X550
Standard LP, 4x 10GbE RJ45, PCI-E x8, Intel XL710
Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB
Standard LP, 2x 25GbE SFP28, Mellanox ConnectX-4 LX EN
Standard LP 2-port 40GbE controller, Intel Fortville XL710
AOC Compatibility Matrix |
CacheVault(s) |
BTR-CV3108-1U1
BTR-TFM8G-LSICVM02 & BKT-BBU-BRACKET-05 |
-
- |
CacheVault for Broadcom 3108 with Supercap mounting in 1U 40x56 fan tray
CacheVault for Broadcom 3108; Supercap mounting bracket for PCI-E location |
1U Cable Management Arm |
MCP-290-00152-0N |
1 |
1U Supermicro Cable Management Arm 2nd Gen |
TPM security module |
AOM-TPM-9670H-S AOM-TPM-9671H-S |
1 1 |
TCG 2.0 compliant trusted platform module (TPM), Horizontal FF TCG 1.2 compliant trusted platform module (TPM), Horizontal FF |
Intel VROC RAID Key |
AOC-VROCINTMOD AOC-VROCSTNMOD AOC-VROCPREMOD |
1 1 1 |
Intel VROC, RAID 0, 1, 5, 10 (Intel SSD Only) Intel VROC Standard, RAID 0, 1, 10 Intel VROC Premium, RAID 0, 1, 5, 10 |
Global Services & Support |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service |
Software |
SFT-OOB-LIC • |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|