|
|
|
| |
| SYS-1028U-TN10RT+ |
- SuperServer 1028U-TN10RT+ (Black)
|
|
|
CPU |
- Intel® Xeon® processor E5-2600
v4†/
v3 family
(up to 160W TDP)
*
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
|
Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
- 2666/2400 ECC DDR4 NVDIMM
|
DIMM Sizes |
- 64GB, 32GB, 16GB, 8GB, 4GB
- NVDIMM: 16GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
| |
| Chipset |
|
SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Connectivity |
- 2 10GBase-T ports via AOC-URN6-i2XT
- Intel® X540 10GBase-T
- 1 Realtek RTL8211E PHY (dedicated IPMI)
|
Graphics |
|
| |
| NVMe/SAS |
- 6 NVMe ports (NVMe from CPU 1)
- 4 NVMe/SAS3** Hybrid ports (NVMe from CPU 2)
|
LAN |
- 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
- 5 USB 3.0 ports
(2 rear, 2 front, 1 Type A)
|
Video |
|
Serial Port |
|
DOM |
- 2 SuperDOM (Disk on Module) ports
|
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
|
|
Software |
|
Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
|
| |
| Form Factor |
|
Model |
|
| |
| Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Color |
|
| |
| Buttons |
- Power On/Off button
- System UID button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- UID LED
|
|
|
PCI-Express |
- 3 PCI-E 3.0 x8 slots
(2 Full-height 10.5" L; 1 Low-profile)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| |
| Hot-swap |
- 10x 2.5" Hot-swap drive bays
- 6 NVMe ports (NVMe from CPU 1)
- 4 NVMe/SAS3 hybrid ports for optional SAS3/SATA3** (NVMe from CPU 2)
** Note: SAS3/SATA3 support requires additional parts in optional parts list
|
| | |
| Fans |
- 8 heavy duty fans with optimal fan speed control
|
Air Shroud |
|
| |
1000W Redundant Power Supplies with PMBus |
Total Output Power |
- 800W: 100 – 127Vac
- 1000W: 200 – 240Vac
- 1000W: 200 – 240Vdc (for CCC only)
|
Dimension (W x H x L) |
|
Input |
- 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7 - 5A / 50-60Hz
- 200-240Vdc / 7 - 5A (for CCC only)
|
+12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
- Max: 83A / Min: 0A (200-240Vdc)
|
12Vsb |
|
Output Type |
- 25 Pairs Gold Finger Connector
|
Certification |
Titanium Level [ Test Report ]
|
|
|
Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
FAN |
- 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features |
- 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| |
| RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
|
See Parts List
|
|
| |
|
|
Part Number
|
Qty
|
Description
|
Motherboard / Chassis |
MBD-X10DRU-i+
CSE-119UAC2-R750
|
1 1 |
Super X10DRU-i+ Motherboard
CSE-119UAC2-R750 Chassis
|
Air Shroud |
MCP-310-81903-0B |
1 |
Mylar air shroud set for SC819U,119U (X10DRU+),HF |
Add-on Card / Module
|
AOC-URN6-I2XT-P |
1
|
AOC-URN6-I2XT |
Backplane
|
BPN-SAS3-116A-N10 |
1
|
10-port 1U SAS3 12Gbps Hybrid backplane, support up to 10x 2.5-inch NVMe storage devices, 4 of them are SAS3/SATA3 drives compatible. |
Cable 1
|
CBL-PWEX-0780 |
1
|
PWYCB,2X4F/GPU-White to TWO 2X2F,P4.2, (5,12V),40/40CM,18AWG,RoHS |
Cable 2
|
CBL-PWEX-0781 |
1
|
PWYCB,2X4F/GPU-White to TWO 2X2F,P4.2, (5,12V),65/65CM,18AWG,RoHS |
Cable 3
|
CBL-SAST-0818 |
5
|
OCuLink v. 1.0,INT,PCIe NVMe SSD, 55CM,34AWG |
Cable 4
|
CBL-SAST-0819 |
3
|
OCuLink v 1.0,INT,PCIe NVMe SSD, 65CM,34AWG,RoHS/REACH |
Cable 5
|
CBL-SAST-0820 |
2
|
OCuLink v. 1.0,INT,PCIe NVMe SSD, 85CM,34AWG,RoHS/REACH |
Parts
|
MCP-130-81901-0N |
1
|
Oculink cable connection plastic holder for AOC-URN6-i2XT |
Parts
|
MCP-150-00009-0B |
1
|
Internal AOC rubber support for SC819U, 119U |
Manual
|
MNL-1812-QRG |
1
|
QRG for SYS-1028U-TN10RT+ |
Riser Card
|
RSC-R1UW-E8R |
1
|
1U RHS WIO Riser card with one PCI-E x8 slot |
Riser Card
|
RSC-UN4-88 |
1
|
RSC-UN4-88 |
Heatsink / Retention
|
SNK-P0057PSU |
2
|
1U Passive CPU Heat Sink for X10 1U 24-DIMM Ultra and Super Blade Series Servers,RoHS/REACH |
Power Supply
|
PWS-1K02A-1R |
2
|
1U 1000W Redundant Power Supply 73.5mm width Titanium Level,RoHS/REACH |
|
|
|
| |
| |
Part Number |
Qty |
Description |
Cable |
CBL-SAST-0880 |
- |
MINI SAS(RA-RS EXIT)-4 SATA,INT,55/55/55/55CM,55CM SB,30AWG for optional 4x SATA3 |
Storage Control Card and Cable(s) |
AOC-S3008L-L8e
AOC-S3008L-L8i
AOC-S3108L-H8iR
|
-
|
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 122HDD, HBA
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60
|
Network Card(s) |
AOC-SGP-i2/4
AOC-STGN-i1S/i2S
AOC-STG-b4S
AOC-STG-i2T
AOC-STG-i2
AOC-S40G-i2Q
More |
-
-
-
-
-
-
- |
Standard LP, 2/4x GbE RJ45, PCI-E x4, Intel i350
Standard LP, 1/2x 10GbE SFP+, PCI-E x8, Intel 82599EN
Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540
Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB
Standard LP 2-port 40GbE controller, based on Intel Fortville XL710
AOC Compatibility Matrix |
CacheVault(s) |
BTR-CV3108-1U1
BTR-TFM8G-LSICVM02 & BKT-BBU-BRACKET-05 |
-
- |
CacheVault for Broadcom 3108 with Supercap mounting in 1U 40x56 fan tray
CacheVault for Broadcom 3108; Supercap mounting bracket for PCI-E location |
Drive Tray(s) |
MCP-220-00047-0B |
- |
Black gen 3rd hot-swap 2.5" HDD tray |
1U Cable Management Arm |
MCP-290-00152-0N |
1 |
1U Supermicro Cable Management Arm 2nd Gen |
Global Services & Support |
OS4HR3/2/1 OSNBD3/2/1 |
- - |
3/2/1-year onsite 24x7x4 service 3/2/1-year onsite NBD service |
Software |
SFT-OOB-LIC • |
1 |
OOB Management Package (per node license) |
Software |
SFT-DCMS-Single |
1 |
DataCenter Management Package (per node license) |
Hide Parts List
|
|
|
|