 |
|
 |
| | Part Number | Qty | Description |
| Bracket | MCP-120-84702-0N | 1 | CB3 mounting bracket for use on chassis with CB2 holes. Bracket to mount CB3 card on existing CB2 standoff on SC847/SC417/SC837/SC826/SC836/SC846 in JBOD configuration.,HF,RoHS/REACH,PBF |
| Bracket | MCP-120-84705-0N | 1 | LP PCI bracket for CBL-NTWK-0587 LAN extension cable,HF,RoHS/REACH,PBF |
| HD Backplane | BPN-SAS3-826SEL1-N4 | 2 | 12-port 2U Simply-Double SAS3 12Gbps single-expander backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD and 4x NVMe/SAS3/SATA3 storage devices |
| Control Board | CSE-PTJBOD-CB3 | 1 | JBOD chassis power control board with IPMI remote on/off feature |
| Cable(s) | CBL-0042L | 1 | 24 PIN POWER CONNECTOR EXTENTION, LF |
| Cable(s) | CBL-0306L | 1 | FRONT CTRL CABLE ROUND 16 TO 16 PIN RIBBON, 65CM |
| Cable(s) | CBL-0459L | 2 | AC Power Cord Latch Clamp |
| Cable(s) | CBL-CDAT-0899 | 1 | I2C,1X4F/P2.5 TO 1X4F/P2.5, 65CM,26AWG,BRN/BLK-SHUNT/ORG |
| Cable(s) | CBL-NTWK-0587 | 1 | INT RJ45M/RJ45F Adapter W/ PCB 50CM 24AWG for SC847D JBOD |
| Cable(s) | CBL-PWEX-0901 | 2 | BPN PWEX,2X4F to 2X4F,GPU,P4.2,BLK*4,YEL*2,RED*2,33CM,18AWG, |
| Cable(s) | CBL-PWEX-0903 | 2 | BPN PWEX,2X4F to 2X4F,GPU,P4.2,BLK*4,YEL*2,RED*2,72CM,18AWG,For CSE-226STS-R1K62P1 only |
| Cable(s) | CBL-SAST-0836 | 4 | MINI SAS HD,INT,48CM,32AWG w/oSB |
| Cable(s) | CBL-SAST-0896 | 2 | MINI SAS HD,INT,SAS3 SSD,80CM w/SB,Flat,30AWG |
| Part(s) | MCP-120-00062-0N | 3 | Blank LP L-bracket (5x5 square hole) |
| Part(s) | MCP-120-22601-0N | 1 | 2U air shroud BKT left screw-less for SC226S |
| Part(s) | MCP-120-22602-0N | 1 | 2U air shroud BKT right for SC226S |
| Part(s) | MCP-130-22602-0B | 1 | Black PDB cover for SC226S |
| Part(s) | MCP-230-82606-0N | 1 | Top middle cover for SC826S |
| Part(s) | MCP-240-22602-0N | 1 | 2U SC226S PWS & PDB housing cage |
| Part(s) | MCP-290-00086-0N | 1 | Cable Management Arm for 1U ball bearing Chassis SC801S/801L,RoHS/REACH |
| Part(s) | MCP-290-82615-0V | 1 | 2U SC226S/ 826S JBOD handle set w/o front control board |
| Fan(s) | FAN-0168L4 | 5 | 80x80x38 mm, 13.5K RPM, Middle Cooling Fan for SC226S Chassis (48-bay) |
| Front Panel | MCP-280-00015-0N | 1 | Front control board for SC826 (inside the left handle),FP826 |
| Front Panel | MCP-280-00018-0N | 1 | SC826 front control board adapter |
| Drive Tray(s) | MCP-290-82607-0N | 1 | 826B/216B rear dummy cover for 2 X 2.5 |
| Drive Tray(s) | MCP-220-00133-0B | 24 | Black gen 8 hot-swap 3.5" HDD tray |
| Power Distributor | PDB-PT226S-8824 | 1 | 12V 25pair connector inpu with special wires 12V/168A output |
| Power Supply & Accessory | PWS-1K02A-1R | 2 | 1U 1000W Redundant Power Supply 73.5mm width Titanium Level,RoHS/REACH |
| Mounting Rail(s) | MCP-290-00139-0N | 1 | |
| Rear Window | MCP-290-00132-0N | 1 | |
| Rear Window | MCP-240-82611-0N | 1 | SC826S, 226S JBOD rear window |
