|
Part Number |
Qty |
Description |
Motherboard / Chassis |
MBD-H12SSW-NT
CSE-815TS-R504WBP4
|
1
1
|
Super H12SSW-NT Motherboard
1U Chassis
|
Backplane
|
BPN-SAS3-815TQ-N4 |
1 |
1U 4-Port Hybrid Backplane Support 4x3.5"SAS3/SATA3 |
Cable
|
CBL-SAST-0827 |
1 |
SLIMLINE SAS x8 (LA) to 8 SATA x4,INT, 70CM,32AWG,100OHM,RoH |
CBL-0335L |
1 |
FRONT CTL CABLE 20 PIN TO 20 PIN W/TUBE,70CM,PBF |
CBL-PWCD-0160-IS |
2 |
PWCD,US,NEMA5-15P TO IEC60320 C13,6FT,16AWG,RoHS/REACH |
Air Shroud
|
MCP-310-81305-0B |
1 |
Mylar air shroud for 1U X11SPW-TF,RoHS |
MCP-310-19002-0N |
1 |
SC815/113/116 Intel DP X9, X8 PC air shroud, 12x13MB |
Manual
|
MNL-2221-QRG |
1 |
AS -1014S-WTRT Quick Reference Guide |
Riser Card
|
RSC-W-66G4 |
1 |
1U LHS WIO Riser card with two PCIe 4.0 x16 slots,HF,RoHS |
RSC-WR-6 |
1 |
1U RHS WIO Riser card with one PCIe 4.0 x16 slot,HF,RoHS |
Software
|
SFT-OOB-LIC |
1 |
License key for enabling OOB BIOS management |
Heatsink / Retention
|
SNK-P0062P |
1 |
1U Passive CPU Heat Sink for AMD Socket SP3 Processors |
*Power Supply
|
PWS-504P-1R |
2 |
500W 1U Redundant PWS W/ 54.5MM Wide |
MCP-250-81502-0N |
1 |
SC815 Redundant Power Distributor Cover |
*Power Distributor
|
PDB-PT112-S2424 |
1 |
WIO X11 Support,PDB-PT112-S2424 is based on PDB-PT112-2424 |
*Fan Holder
|
CSE-PT0135 |
1 |
FAN HOLDER FOR SIX 40X56MM COUNTER ROTATING FANS |
MCP-340-00035-0B |
2 |
Dummy fan 40x56mm for 40x56 counter-rotating fan (cost-effective) |
*Peripheral Drive
|
CSE-PT93L-B |
1 |
Black DVD dummy cover for SC813, 813M, 815, PBF-RoHS |
*Front Panel
|
FPB-FP815U |
1 |
815 UIO front control board (U) |
*Parts
|
MCP-120-00030-0N |
1 |
Blank LP L-bracket (1 raw of capsule hole) |
MCP-120-00053-0N |
2 |
Blank FH L bracket w/o SCSI cutout for SC825,836,846,743 |
*Drive Tray(s)
|
MCP-220-00075-0B |
4 |
Black gen 5.5 hot-swap 3.5" HDD tray |
*Rear Window
|
MCP-240-00098-0N |
1 |
WIO rear window for SC113,SC116, SC815 Redundant PWS |
*Rail Set
|
MCP-290-00016-0N |
1 |
1U open rack bracket set for CSE-PT51L,MCP-290-00054-0N |
MCP-290-00054-0N |
1set |
Rail set, quick/quick, optional for 1U 17.2 |
*Fan
|
FAN-0141L4 |
4 |
40x40x56 mm 20.5K RPM / 17.6K RPM Counter-rotating Fan |
Notes:
- Parts with * are inside the chassis
- Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
|