  | |
| | 4042G-72RF4 |
- A+ Server 4042G-72RF4 (Black)
|
| |
| | CPU |
- Quad 1944-pin Socket G34
- Supports up to four 16/12/8/4-Core ready AMD Opteron 6000 Series processors
- HT3.0 Link support
|
| Chipset |
- AMD SR5690/SR5670/SP5100 Chipset
|
| Note |
- Supports 6000 processors with Max ACP 80W (TDP 115W)
|
| | |
| | Memory Capacity |
- 32 DIMM sockets
- Support up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
- Quad channel memory bus
- For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
-
See Detailed Memory Support Matrix
|
| Memory Type |
-
Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| SAS |
- LSI 2208 8-port SAS2 controller
- HW RAID 0, 1, 5, 6, 10, 50, 60 (1GB cache)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers |
- Intel® I350 controller, 4-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
| Super I/O |
|
| VGA |
- Matrox G200 16MB DDR2 graphics
|
| | |
| | SATA |
|
| SAS |
|
| LAN |
- 4 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB |
- 7x USB 2.0 ports
- 2x Rear, 2x internal headers-4x ports, and 1x type A
|
| VGA |
|
| Serial Ports |
|
| IPMI |
- 1x dedicated IPMI LAN port; WPCM450
|
| Others |
- 1 SATA DOM power connector, TPM header
|
| | |
| | PCI-Express |
- 2x PCI-E 2.0 x16 slots
- 2x PCI-E 2.0 x8 slots
|
| | |
| | BIOS Type |
- 16Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
|
| |
| Form Factor |
|
| Model |
|
| | |
| | Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| | |
| | Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports |
|
| | |
| | Hot-swap |
- 5x 3.5" Hot-swap SAS/SATA Drive Bays and 3x 5.25?Peripheral Drive Bays
- SAS or enterprise SATA HDD only recommended
|
| Peripheral Bay(s) |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| | |
| | SAS / SATA Hard Drive Backplane with SES2 |
| | |
| | Fans |
- 3x 7200 RPM Hot-Swappable Cooling Fans
- 3x 8200 RPM Hot-Swappable Rear Exhaust Fan
|
| | |
| |
Redundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 |
| AC Voltage |
- 100-240 V, 50-60 Hz, 15 Amp max
|
| +12V |
- 100 Amp/115 Vac
- 117 Amp/230 Vac
|
| With Power Distributor |
- +5V: 30 Amp
- +3.3V: 25 Amp
- -12V: 0.6 Amp
|
| Certification |
Platinum Certified
|
| | |
| | CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- CPU 4-Phase-switching voltage reulator
|
| FAN |
- Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status monitor for speed control
- Support 3-pin fans with fan-speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- PC Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| | |
| RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 30°C (50°F to 86°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
