A+ Server 1041A-T2F
  Products  Systems  1U   [ 1041A-T2F ]








Integrated Board
Super H8QIi+-F


Key Features

1. Four Six-Core AMD Opteron™ 8000

    Series (Socket F) processor support;

    HT3.0 Link support; 24 Cores in 1U
2. AMD SR5690 + SP5100 Chipset

    PCI-E Gen2 support
3. Up to 128GB Registered ECC DDR2

    800/667/533 SDRAM in 16 DIMM
4. 1x PCI-e 2.0 x16 slot
5. 3x 3.5" Hot-swap SATA Drive Bays

    2x Type A USB connectors
6. 6x 4-pin PWM Fans w/ Optimal Fan

    Speed Control
7. Integrated IPMI 2.0 with KVM and

    Dedicated LAN
8. 1000W High-efficiency Power Supply


Available Colors: Black    


 Drivers & Utilities       BIOS       Manuals

 Tested Memory List       Tested HDD List


 


Product SKUs
AS-1041A-T2F
  • A+ Server 1041A-T2F (Black)
 
Motherboard


Super H8QIi+-F
 
Processor/Chipset
CPU
  • Quad 1207-pin Socket F
  • Supports up to four Six-Core AMD Opteron™ 8000 Series (Socket F) processors **
  • HT3.0 Link support
Chipset
  • AMD SR5690 / SP5100
 
System Memory
Memory Capacity
  • Sixteen 240-pin DIMM sockets
  • Support up to 128GB DDR2 800/667/533 MHz memory
  • Single or Dual (recommended) channel memory support
  • For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 SATA2 (3 Gb/s) Controller
  • 6 SATA2 Ports
  • SATA RAID 0, 1, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82546GB Dual Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Super I/O
  • Winbond® 83627DHG chip
VGA
  • Matrox G200eW with 16MB DDR
 
Input / Output
SATA
  • 6 SATA2 ports
IDE
  • Single EIDE channel support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA 100/133
Floppy
  • 1 Floppy port; 1.44 MB support
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 dedicated LAN support IPMI
USB
  • FUCI
  • Up to 4 USB Ports 2.0 Compliant
  • 2 Rear Ports
  • 2 Internal Headers, 2 Type A
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 Header
VGA
  • 1 VGA port
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
  • SST 49LF080A BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 1U Rackmount
Model
  • SC818TQ+-1000
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 27.75" (705mm)
Gross Weight
  • 43 lbs (19.5 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
 
Expansion Slots
PCI-Express
  • 1 x16 PCI-e Slot
HyperTransport
  • 1 HyperTransport (HTX) Connectors
 
Drive Bays
Hot-swap
  • 3 x 3.5" Hot-swap SATA drive bays
 
SATA Backplane
1U SATA Backplane
 
Peripheral Drives
DVD-ROM
  • Slim 8x DVD, 24x CD, DVD-ROM drive
 
System Cooling
Fans
  • 6x heavy-duty counter-rotating fans with optimal fan speed control
Shroud
  • 1x Air Shroud
 
Power Supply
1000W AC-DC high-efficiency power supply w/ PFC + PDB
AC Voltage
  • 100 - 240V, 50 - 60Hz, 15 - 7Amp
+5V standby
  • 4 Amp
+12V
  • 83 Amp
With Power Distributor
  • +5V: 20 Amp
  • +3.3V: 20 Amp
  • -12V: 0.6 Amp
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
  • CPU 4-Phase-switching voltage reulator
FAN
  • Total up to 9-fan status tachometer monitoring
  • Up to nine 4-pin fan headers
  • Status monitor for speed control
  • Support 4-pin fans with fan-speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • PC Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Descriptin
Motherboard / Chassis MB-H8QIi+-F-O-P

CSE-818TQ+-1000
1

1
Super H8QIi+-F Motherboard

1U SC818+ Chassis (Black)
Backplane BPN-SAS-818TQ 1 818 SAS backplane w/ AMI MG9071 chip
Cable(s) CBL-0044L

CBL-0157L
3

1
2Ft. SATA Cable

8-pin to 8-pin Ribbon Cable For SGPIO
CD CDR-APLUS2 1 Driver CD for AMD SR56x0 and SP5100 chipset motherboards
Fan(s) FAN-01024L

CSE-PT0135
6

1
4-pin PWM Cooling Fan

Fan Holder for 6x Fans
Drive Bay CSE-PT39B 3 Black Hot-swappable Hard Drive Trays
Heatsink / Retention SNK-P0022+ 4 1U Passive Heatsink for AMD Socket F CPUs

Please refer to our Thermal Components Matrix
Mounting Rails CSE-PT51 1 1U Mounting Rail Kit
Peripheral Drives DVM-PNSC-824B

CSE-CDSC
1

1
Black Panasonic 8x DVD, 24x CD, DVD-ROM Drive

Slim CD-ROM Adapter Card
Power Supply PWS-1K01-1R

PDB-PT818-8824

CSE-PT0126
1

1

1
1000W 1U power supply

Power Distributor Board

Power Distributor Cover
Riser Card RSC-RR1U-E16 1 PCI-E x16 to PCI-E x 16 Riser Card
Air Shroud CSE-PT0128 1 Air Shroud for CPUs


  ** Opteron 837x, 838x, 839x, and 84xx supported

Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Certain products may not be available in your region