A+ Server 1011S-MR2 / 1011S-MR2B
  A+ Products  Systems   1U   [ 1011S-MR2 / 1011S-MR2B ]








Integrated Board
Super H8SSL-i2


Key Features

1. Mini-1U Form Factor (14" Depth)
2. Single Quad-Core AMD® Opteron™

    1000 Series (Socket AM2/AM3)

    support, 1000MHz HyperTransport Link
3. Up to 8GB DDR2 800/667/533 SDRAM
4. 1 64-bit PCI-X 133MHz Full-height /

    half-length PCI-X Slot
5. Dual-port Broadcom BCM5704C Gigabit

    LAN / Ethernet Controller
6. Support for IPMI 2.0
7. Supports up to One 3.5" SATA HDD
8. 260W Power Supply


 Drivers & Utilities       BIOS       Manuals  Tested Memory List     
 


Product SKUs
AS-1011S-MR2B
  • A+ Server 1011S-MR2B (Black)
 
Motherboard
Super H8SSL-i2
 
Processor/Chipset
CPU
  • Single 940-pin ZIF Socket
  • Supports one Quad-Core AMD Opteron™ 1000 Series

    (Socket AM2/AM3) processor
  • 4 phase VRM
System Bus
  • 800MHz HyperTransport
Chipset
  • ServerWorks HT1000
 
System Memory
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB DDR2 800/667/533 MHz memory
  • Single or Dual (recommended) channel memory
Memory Type
  • DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB
Memory Voltage
  • 1.8V only
 
On-Board Devices
SATA
  • 4 SATA Ports using ServerWorks HT1000 controller
IDE
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA/100
IPMI
  • 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI)
  • Remote Management Module
  • (Card not included)
Network Controllers
  • Broadcom BCM5704C Dual Gigabit Ethernet Controller
  • Supports 1000BASE-T, RJ45 output
VGA
  • ATI ES1000 Graphics Controller
Super I/O
  • Winbond 83627HF
 
Expansion Slots
PCI-X
  • 1x 64-bit 133MHz PCI-X (3.3V) slot
 
Input / Output
SATA
  • Up to four SATA devices
IDE
  • Single ATA 100 EIDE channels support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports ATA/100
Floppy
  • 1 Floppy port; 1.44 MB
LAN
  • 2 RJ45 LAN ports
USB
  • 2 USB Rear Ports
  • 4 USB Internal Headers
  • USB 2.0 Compliant, 1.1 Compatible
VGA
  • 1 VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial ports
  • 1 Header
 
System BIOS
BIOS Type
  • 4Mb Flash EEPROM with AMI® BIOS
  • SST-49LF004B BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0
  • BIOS Rescue Hot Keys
  • SMBIOS 2.3
  • USB Keyboard support
  • Hardware BIOS Virus Protection
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 16.8" (427mm)
Depth
  • 14.0" (356mm)
Gross Weight
  • 17 lbs (7.7kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • 2x USB Ports (2.0 Ready)
 
Peripheral Drives
CD-ROM
  • TEAC Slim 24x CD-ROM drive
System Cooling
Fans
  • 2x 4cm 3-pin Nidec Counter-rotating Fans
 
Power Supply
Thermal control 260W AC power supply with PFC

[ 24-pin, 4-pin=12V, (2) 4-pin ]
AC Voltage
  • 100 - 240V, 60-50Hz, 4 Amp Max
DC Output
  • 5V + 3.3V ≤ 140W
+5V
  • 25.0 Amp
+5V standby
  • 2.0 Amp
+12V
  • 18.0 Amp
-12V
  • 1.0 Amp
+3.3V
  • 15.0 Amp
 
Regulatory (Power Supply)
Safety / EMC
  • USA - UL Listed, FCC
  • Canada - CUL listed
  • Germany - TUV Certified
  • Europe/CE Mark
  • EN 60950/IEC 60950-Compliant
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +5V, ±12V, 5.5V Standby, 2.5V Standby, VBAT
  • Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
  • CPU 4-phase Switching Voltage Regulator
FAN
  • Total up to five 3-pin fan headers
  • 5 Fan Status Tachometer monitoring
  • Status Monitor for Speed Control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip support
  • I2C temperature sensing logic
LED
  • CPU / Overheat LED
  • Suspend-state indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Header
  • Chassis Intrusion Detection
  • SDDC Support
  • Chipkill Support
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-H8SSL-i2-O

CSE-512F-260B
1

1
Super H8SSL-i2 Motherboard

1U SC512F-260B Chassis
Cable(s) CBL-0049L

CBL-0160L

CBL-0178L
1

1

1
16-pin To 16-pin Front Cable

Power Cord

48cm Flat SATA Cable
Fan(s) FAN-0087

CSE-PT0111
2

1
1.1K RPM Counter-rotating Fan

1U Fan Tray For 2 Cooling Fans
Heatsink SNK-P0026 1 1U AMD CPU Passive Heatsink
Peripheral Drives CDM-TEAC-24(B) 1 Slim 24x TEAC CD-ROM Drive (B = Black)
Power Supply PWS-0055 1 SP262-1S 260W 1U power supply
Riser Card CSE-RR1U-X 1 1U 1-Slot 64-bit 3.3V PCI-X - Left Side
Air Shroud MCP-310-00027-01 1 Internal Air Shroud
Optional Parts List
  Part Number Qty Description
Mounting Rails CSE-PT8 - 1U Mounting Rail Kit
IPMI AOC-1UIPMI - 1U IPMI 2.0 Card
Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Certain products may not be available in your region