Question
Can I use a graphics card in the PCIe x16 slot on the X10SL7-F motherboard? If yes, are there any Jumpers or BIOS settings need to enable this functionality?
Answer

Yes, customer can use a graphic card in PCIe x16 slot in the X10SL7-F motherboard and need to change the BIOS settings:



  1. in order to make it work. The jumper might not be needed but if it still doesn’t work after the BIOS settings had changed, then change the jumper's setting


  2. (a)  BIOS settings >> Advanced >> PCI settings >> changed VGA priorities to “Off Board”, save and then exit. (b) Change JPG1 Jumper from Pin1-2 {Enable} to Pin2-3 {Disable}.
Was this FAQ helpful?
YES      NO

Enter Comments Below:
Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com.



 Enter your email address below if you'd like technical support staff to reply:
 Please type the Captcha (no space)
H V X M

FAQ Stats
FAQ ID Related Category / Keyword Date Posted Code
21023 N/A 06/26/15


    Print Answer