 | |
 | | SYS-7047R-72RF | - SuperServer 7047R-72RF (Black)
| | | | | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family† | | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | | | | | | Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10 | | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | SAS | - SAS2 from Broadcom 2208
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Video | - G200 (Nuvoton WPCM450 BMC with graphic controller)
| | Super I/O | | | | | | SATA | - 2x SATA 3.0 ports (6Gbps)
- 8x SATA 2.0 ports (3Gbps)
| | SAS | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x Front USB 2.0 + 4x Rear USB 2.0 ports
- MB: 4x rear + 2x via header + 1x Type A
| | Video | | | Serial Port / Header | | | | | | PCI-Express | - 1 PCI-E 3.0 x16 slot
- 6 PCI-E 3.0 x8 slots
| | | | | BIOS Type | - 64Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
| | | | |
| | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
| | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Information LED
- Power Fail LED
| | Ports | | | | |
| | Hot-swap | - 8x 3.5" Hot-swap SAS2/SATA Drive Trays
| | Peripheral Bay(s) [90o Rotatable] | - 2x 5.25" Peripheral Drive Bays
- 1x 5.25" Bay that fits 3.5" bay devices
| | | | | SAS / SATA Hard Drive Backplane w/AMI MG9072 | | | |
| | Fans | - 3x 5000 RPM Hot-swap PWM Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust PWM Fans
| | | |
| | 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | | AC Input | - 100-240 V, 50-60 Hz, 11-4.5 Amp
| | DC Output | - 4 Amp @ +5V standby
- 75 Amp @ +12V
| | Certification |   Platinum Certified
[ Test Report ] | | | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| | FAN | - Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - System Information LED
- Suspend static indicator LED
- UID/Remote LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
