 |  | | SYS-4047R-7JRFT | - SuperServer 4047R-7JRFT (Black)
| | | | | CPU | - Intel® Xeon® processor E5-4600 v2
(12-Core)** or E5-4600 (8-Core)
family - Quad Socket R (LGA 2011)
** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S. | | Cache | | | System Bus | | | | | | Memory Capacity | - 24x 240-pin DDR3 DIMM slots
- Supports up to 768GB DDR3 ECC Registered memory (RDIMM)
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | AHCI SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1 | | SCU SATA | - SATA 2.0 3Gbps with RAID 0, 1, 10
| | SAS | - SAS2 via Dual Broadcom 2308
- (IT mode)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T , 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | - Matrox G200 (Nuvoton WPCM450 BMC)
| | Super I/O | | | | | | SAS | - SAS2 ports (6Gbps) (IT mode)
| | LAN | - 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
| | USB | - 10x USB 2.0 ports total
(4x rear + 4x via header + 2x Type A) | | Serial Port / Header | - 2x Fast UART 16550 ports: 1 rear and 1 header
| | | | | BIOS Type | - 16MB SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
| | | | | | Form Factor | - Tower / 4U Rackmountable
- Rackmount Kit (MCP-290-00057-0N)
| | Model | | | | | | Height | | | Width | | | Depth | | | Weight | - Net Weight: 60 lbs (27.2 kg)
- Gross Weight: 100 lbs (45.4 kg)
| | Available Colors | | | | | | Hot-swap | | | | | | PCI-Express | - 8x PCI-E 3.0 x16 slots
(1x PCI-E 3.0 x8 in x16 slot) | | | | | SAS/SATA HDD Backplane | | | | | Fans | - 4x 92mm RPM Hot-Swappable Cooling Fans
- 2x 80mm RPM Hot-Swappable Rear Exhaust Fan
| | Shrouds | - 1x Air Shroud (MCP-310-84805-0B)
| | | |
| 1620W high-efficiency redundant power supply w/ PMBus | | AC Input | - 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
| | DC Output | - 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
| | Certification |   Platinum Certified
[ Test Report ] | | | | | CPU | - Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
| | FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
| | Temperature | - Monitoring for CPU and system environment
- Thermal Control for 8x fan connectors
| | Other Features | - Chassis intrusion detection
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
