| |
|
|
|
|
| | Integrated Board | | | | | | Key Features Cooling Optimized Solution Supports Hyper-Speed Qualified low latency NICs here 1. Dual Intel® Xeon® processor E5-2687W v2 (Ivy Bridge) 2. Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM slots Default: 8x 8GB 1866MHz DDR3 RDIMM 3. 2x PCI-E 3.0 x16, 3x PCI-E 3.0 x8, 1x UIO PCI-E 3.0 x8 (for SMCI UIO) or 1x PCI-E 2.0 x4 (in x8) 4. I/O ports: 2 GbE LAN, 4 USB 3.0, 2 HD/AC97, 1 IPMI dedicated LAN ports, and 2 IEEE 1394 Header 5. 8x 3.5" Hot-swap HDD Bays Support SAS2 HW RAID via Broadcom 2208; 2x 3.5" Hot-swap SATA3 HDD Bays 6. 1280W Redundant Power Supplies Platinum Level (95%) | | Available Colors: | Black | Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (including but not limited to CPU, memory, and HDDs). | |
| |
| | | | | SYS-6027AX-72RF-HFT3 | - SuperServer 6027AX-72RF-HFT3 (Black)
| | | CPU | - Dual Intel® Xeon® processor E5-2687W v2 (Ivy Bridge) (up to 150W TDP)
- Dual Socket R (LGA 2011)
| Note | † BIOS version 3.0 or above is required | Cache | | System Bus | | | | Memory Capacity | - 8x 8GB DDR3 ECC 1866MHz RDIMM (Default)
- 16x 240-pin DDR3 DIMM slots
- Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | Chipset | | SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
| SAS | - SAS2 from Broadcom 2208
- RAID 0, 1, 5, 6, 10, 50, 60 support
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| Graphics | | Audio | - RealTek ALC889 7.1 High Definition Audio with S/PDIF header
| | | Serial ATA | - 2x SATA 3.0 ports (6Gbps)
- 8x SATA 2.0 ports (3Gbps)
| SAS | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| USB | - 4x USB 3.0 (2 front, 2 rear) and 4x USB 2.0 ports
| Audio | - Line-in / Line-out / Microphone Ports
| Video | | Serial Port / Header | | | | | | Form Factor | | Model | | | | Width | | Height | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
| | | PCI-Express | - 2 PCI-E 3.0 x16 slots
- 3 PCI-E 3.0 x8 slots
- 1 UIO PCI-E 3.0 x8 (for SMCI UIO) or
1 PCI-E 2.0 x4 (in x8) slot | | | Hot-swap | - 10x 3.5" Hot-swap SAS/SATA HDD trays
| | | LCD Screen | | | | 1x SAS2 / SATA backplane | | | Fans | - 4x PWM fans w/ optimal fan speed control
| Heatsink | | | | 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | AC Input | - 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
| DC Output | - 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
| Certification | Platinum Certified [ Test Report ] | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
| | | RoHS
| | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | |
| | |
| | | | | Part Number | Qty | Description | Motherboard / Chassis | MBD-X9DAX-7F-HFT CSE-829BTQ-R1K28LPB | 1 1 | Super X9DAX-7F-HFT Motherboard 2U Chassis | Cooling Fan | FAN-0118L4 | 4 | 80 x 80 x 38 mm, 9.5K RPM, 4-pin PWM Fan, Hot Swap | CPU | P4X-DPE52687WV2-SR19V | 2 | IVY B. R 8C E5-2687WV2 3.4G 25M 8GT 150W 2011 M1,HF,RoHS/REACH,PBF | Heat Sink | SNK-P2048P | 2 | 2U Passive CPU Heat Sink for X9 Hyper-speed Series Servers | Memory | MEM-DR380L-HL02-ER18 (Hynix) or MEM-DR380L-SL03-ER18 (Samsung) | 8 | 8GB DDR3-1866 2R*8 ECC REG DIMM,HF,RoHS/REACH,PBF
or
8GB DDR3-1866 2Rx8 LP ECC REG DIMM,HF,RoHS/REACH,PBF | Power Supply | PWS-1K28P-SQ | 2 | 1U 1280W, redundant single output power supply |
| | | |
|
|
|