 | |
 | | SYS-5027R-WRF | - SuperServer 5027R-WRF (Black)
| | | | | CPU | - Single Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600/1600 v2 family† | | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | | | | | | Memory Capacity | - 8x 240-pin DDR3 DIMM slots
- Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 64 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450RA0BX
| | Network Controllers | - Intel® i350 Dual port GbE LAN
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | VGA | - Matrox G200eW 16MB DDR2 graphics controllers
| | | | | SATA | - 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
| | SCU | - 4x SATA ports (3Gbps) via SCU
| | LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 8x USB 2.0 ports total
(4 rear + 4 via headers) | | VGA | | | Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| | | | | PCI-Express | | | | |
| | Hot-swap | - 8x 3.5" Hot-swap drive bays
| | | |
| SAS/SATA HDD Backplane
(SAS support requires optional SAS controller) | | | |
| | Fans | - 3x 80x80x38mm 7K RPM Cooling fans
| | | |
| | 500W high-efficiency redundant power supplies with PMBus | | AC Input | - 100-240 V, 50-60 Hz, 6.1-2.6 Amp
| | DC Output | - 4 Amp @ +5V standby
- 41.7 Amp @ +12V
| | With Power Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
| | Certification |   Platinum Certified
[ Test Report ] | | | | | BIOS Type | - 8MB SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
