| | SSG-2027R-AR24 | - SuperServer 2027R-AR24 (Black)
| | | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family† (up to 130W TDP) | Note | † BIOS version 3.0 or above is required | Cache | | System Bus | | | | Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC Registered memory (RDIMM)
- Up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM)
| Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | Chipset | | AHCI SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
| SCU SATA | - SATA 2.0 3Gbps with RAID 0, 1, 10
| SAS | - SAS2 via Broadcom 2208 (1GB cache)
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| Network Controllers | - Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| Graphics | | | | AHCI SATA | - 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
| SCU SATA | - 4x SATA 2.0 ports (3Gbps)
| SAS | | LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
| USB | - 7x USB 2.0 ports total
(4 rear + 2 via header + 1 Type A) | VGA | | Serial Port / Header | - 2x Fast UART 16550 serial COM port
(1 rear & 1 header) | | | | | Form Factor | | Model | | | | Width | | Height | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
| | | PCI-Express | - 1x PCI-E 3.0 x16 slot
- 4x PCI-E 3.0 x8 slots
| | | Hot-swap | - 24x Hot-swap 2.5" SAS2/SATA3 HDD Bays with direct attached backplane
| | | SAS2 / SATA3 direct attached backplane | | | Fans | - 3x 8cm 9.5K RPM, 4-pin PWM fans
| | | 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | AC Input | - 100-240 V, 50-60 Hz, 11-4.5 Amp
| DC Output | - 4 Amp @ +5V standby
- 75 Amp @ +12V
| Certification | Platinum Certified [ Test Report ] | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
| | | RoHS
| | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |