| | SYS-5016T-MRB | - SuperServer 5016T-MRB (Black)
| | | CPU | - LGA 1366 Socket
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP) - NOTE: Intel Xeon® 3500 Series and Core™ i7 are Not Supported (Max TDP > 100 Watts)
| System Bus | | | | Memory Capacity | - Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
- Three Channel memory bus
- 6 DIMM sockets
| Memory Type | - 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | Chipset | - Intel® X58 Express chipset
- ICH10R
| SATA | - Intel ICH10R SATA (3.0Gbps) Controller
- RAID 0 support
| Network Controllers | - 2x Intel® Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| VGA | | Super I/O | | Clock Generator | | | | PCI-Express | | | | Serial ATA | - 6 SATA ports
- 6 SATA hard drives supported
| Floppy | - 1 Floppy controller; 1.44 MB
| LAN | | USB | - 2x USB rear ports
- 2x USB on-board
- 2x USB internal header(4 ports)
- Total 8 USB 2.0 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
| | | BIOS Type | - 4Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| Ports | | | | Internal Bay | - 1x 3.5" internal SATA drive bay
| | | Fans | | | | 200W Low Noise High-Efficiency AC-DC power supply w/ PFC | AC Voltage | - 100 - 240V, 50-60Hz, 4-2 Amp Max
| +5V | | +5V standby | | +12V | | -12V | | +3.3V | | Certification | Certified | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| LED | - CPU / System Overheat LED
- +5V Standby alert LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |