| | | | | SYS-1027R-WC1RT | - SuperServer 1027R-WC1RT (Black)
| | | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family† (up to 130W TDP) | Note | † BIOS version 3.0 or above is required | Cache | | System Bus | | | | Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC and non-ECC UDIMM
| Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | Chipset | | SATA | - SATA3 (6Gbps) with RAID 0, 1
| SAS | - SAS3 (12Gbps) via Broadcom 3108
- RAID 0, 1, 5, 6, 10, 50, 60 support
- 2GB DDR3 Cache
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| Network Controllers | - Intel® x540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
| Graphics | - G200 (Nuvoton WPCM450 BMC)
| | | Serial ATA | | SAS | | LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
| USB | - 6x USB 2.0 ports total (4 rear, 2 front)
| VGA | | Serial Port / Header | - 1x Fast UART 16550 header
| | | Software | | Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
| | | | | Form Factor | | Model | | | | Width | | Height | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- UID button
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
| | | PCI-Express | - 2 PCI-E 3.0 x16 full-height, Half-length slots
- UIO AOC Compatibility Matrix
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) | | | Hot-swap | - 10 Hot-swap 2.5" SAS / SATA HDD trays (connected to onboard storage controller)
| | | SAS/SATA HDD Backplane | | | Fans | - 6x 40x56mm Counter-rotating PWM Fans
| | | 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C | AC Voltage | - 700W: 100 - 140 V, 50-60 Hz, 8.5-6 Amp
- 750W: 180 - 240V, 60-50 Hz, 5-3.8 Amp
| DC Output +5V standby | | DC Output +12V | - 700W: 58 Amp @ 100-140V
- 750W: 62 Amp @ 180-240V
| With Power Distributor | - +5V: 25 Amp
- +3.3V: 12 Amp
- -12V: 0.6 Amp
| Certification | Gold Certified | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS resuce hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
| | | RoHS
| | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | |
| | |
| | | | | Part Number | Qty | Description | Motherboard / Chassis | MBD-X9DRW-CTF31 CSE-116AC-R700WB | 1 1 | Super X9DRW-CTF31 Motherboard 1U Chassis | Backplane | BPN-SAS3-116A | 1 | 10-port 1U SAS3 12Gbps direct-attached backplane, support up to 10x 2.5-inch SAS3/SATA3 HDD/SSD | Cable 1 | CBL-0157L-01 | 1 | 8PIN TO 8PIN CABLE FOR SGPIO,615MM,PBF | Cable 2 | CBL-0228L | 2 | 55CM SATA ROUND S-RA PBF | Cable 3 | CBL-SAST-0550 | 1 | Internal Mini-SAS HD to Mini-SAS HD 25cm,30AWG,HF,RoHS/REACH | Cable 4 | CBL-SAST-0568 | 1 | Internal Mini-SAS HD to Mini-SAS HD 35cm,30AWG,12Gb/s | Riser Card | RSC-R1UW-2E16 | 1 | 1U LHS WIO Riser card with two PCI-E x16 slots | Heatsink / Retention | SNK-P0047PS | 1 | 1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB | Heatsink / Retention | SNK-P0047PSC | 1 | 1U Passive Front CPU Heat Sink w/ a Side Air Channel for X9, X10 Systems Equipped with a Narrow ILM MB | Rail Set | MCP-290-00043-0V | 1 set | Rail set for SC113 | | | | | | | Part Number | Qty | Description | Cable for Storage Controller Card Connection | CBL-0343L-01 | 1 | IPASS to 4 SATA Cable, 30AWG 76/66/54/45CM, W/ 66CM | Rail Set | MCP-290-00063-0N | 1 set | Rail set, quick/quick, for 1U 17.2"W SC113 | Network Card(s) | AOC-SGP-i2 AOC-SGP-i4 AOC-SG-i2 AOC-SG-i4 AOC-STG-b4S AOC-STGN-i2S AOC-STG-i2T AOC-STG-i2 | - - - - - - - - | Standard LP, 2x GbE RJ45, PCI-E x4, Intel® i350AM2 Standard LP, 4x GbE RJ45, PCI-E x4, Intel® i350 Standard LP, 2x GbE RJ45, PCI-E x4, Intel® 82575EB Standard LP, 4x GbE RJ45, PCI-E x8, Intel® 82576EB Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom® BCM57840S Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel® 82599ES Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel® X540 Standard LP, 2x 10GbE CX4, PCI-E x8, Intel® 82598EB | Storage Controller Card(s) | N/A | - | N/A |
| | | |