 | |
 | | SYS-6013A-T | - SuperServer 6013A-T (Beige)
| | SYS-6013A-TB | - SuperServer 6013A-TB (Black)
| | | | CPU | | • Dual mPGA604 ZIF Sockets
• Supports up to two Intel® Xeon® processor(s) with 1MB integrated Advanced Transfer Cache up to 3.20GHz |  | | System Bus | | 533MHz/400MHz system bus | | | | | Memory Capacity | | • Four 184-pin DIMM sockets
• Supports up to 8 GB ECC DDR266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs | | | Memory Type | | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs | | | DIMM Sizes | | 256 MB, 512 MB, 1 GB, 2 GB | | | Memory Voltage | | 2.5 V only | | | | | Chipset | | • Intel® E7501 chipset
• MCH + ICH5R + P64H2 | | | IPMI | | Support for Intelligent Platform Management Interface v.1.5 (Optional) | | | Serial ATA | | • ICH5R SATA controller
• Dual Serial ATA ports
• RAID 0, 1 Supported (Windows 2000, XP, 2003; RedHat 8.0/9.0; SuSE Linux 8.1/8.2) | | | Network Controllers | | • 1x Intel® 82541 Gigabit
• 1x Intel® 82551QM 10/100M
•Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | | 1x full-height, full-length 32-bit 33MHz PCI (5V) expansion slot (Riser card required) | | | | | IDE | | • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | | USB | | Up to 5 USB ports | | | Serial Ports | | 2 Fast UART 16550 serial ports | | | Parallel Port | | Port header provided; parallel cable required for parallel port | | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | BIOS Type | | 4Mb Flash EEPROM with AMI® BIOS | | | BIOS Features | | • Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection | | | | | | | Height | | 1.7" (43mm) | | | Width | | 16.8" (426mm) | | | Depth | | 22.6" (574mm) | | | Gross Weight | | 35 lbs (15.9 kg) | | | Available Colors | | Beige, Black | | | | | Buttons | | • Power On/Off button
• System Reset button | | | LEDs | | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED | | | Ports | | none | | | | | Hot-swap | | 2x 3.5"SATA Hot-swap drive bays
(Note: Hard drive Hot-Add is only supported through proper SATA RAID add-on card.) | | | | | Floppy | | Panasonic 3.5" 1.44MB Floppy Drive | | | CD-ROM | | TEAC Slim 24x CD-ROM drive | | | | | 1x 1U Serial ATA backplane | | | | 350W AC power supply w/ PFC
[ 24-pin, (8-pin=12V) ] | | | AC Voltage | | • 100 - 240V, 60-50Hz, 6 Amp | | | DC Output | | • 5V + 3.3V ≤ 157W
• 12V + 5V + 3.3V ≤ 330W | | | +5V | | 25.0 amp | | | +5V standby | | 2.0 amp | | | +12V | | 25.0amp | | | -12V | | 0.8 amp | | | +3.3V | | 20.0 amp | | | | | CPU | | • Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) | | | FAN | | • Total of five 3-pin fan headers
• 2x fans with tachometer monitoring• Overheat backup fan connector
• Status monitor with firmware/software on/off control | | | Temperature | | • Monitoring for CPU, chassis, environment
• CPU thermal trip support | | | LED | | • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED | | | Other Features | | • Chassis intrusion detection (through LDCM)
• Chassis intrusion header
• Chipkill support | | |
