| | SYS-5015M-URV | - SuperServer 5015M-URV (Silver)
| SYS-5015M-URB | - SuperServer 5015M-URB (Black)
| | | CPU | - Single LGA775 ZIF Socket
- Supports a Quad-Core Intel® Xeon® 3200 series processor
- Supports a Dual-Core Intel® Xeon® 3000 series processor
- Supports a Quad-Core Intel® Core™2 Extreme series processor
- Supports an Intel® Core™2 Quad series processor
- Supports an Intel® Core™2 Duo series processor
- Supports an Intel® Pentium® processor E2000 series
- Supports a Dual-Core Intel® Pentium® D processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Celeron® processor E1000 series
- Supports an Intel® Celeron® processor 400 series
- NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
| System Bus | - 1066 / 800 / 533 MHz system bus
| | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
| Memory Type | - DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| Memory Voltage | | | | Chipset | - Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel® 82573V + Intel® 82573L
| Serial ATA | - Intel® ICH7R SATA controller built-in (3 Gbps)
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO+)
- NOTE: Must use Dedicated LAN for IPMI function
| Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel® 82573V + Intel® 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
| VGA | - On-board ATI ES1000 (16MB) graphics
| Super I/O | | Clock Generator | | | | Left Slots | - 1 (x8) PCI-Express Slot (via Riser Card)
- 1 Universal I/O (UIO) Slot (via Riser Card)
| Right Slot | - 1 (x4) PCI-Express (in x8) Slot (via Riser Card)
| | | Serial ATA | - Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB
| LAN | | USB | - Up to 6x USB 2.0 / 1.1 compliant ports
- 2 rear ports
- 2 internal header for 4 USB 2.0/1.1 ports
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
| | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- UID LED
| Ports | - 2x USB & DB9 COM port tray
- (Optional - in place of floppy drive)
| | | Hot-swap | - 4x 3.5" Hot-swap drive bays
| | | Fans | | | | 450W (1 + 1) Redundant AC power supply w/ PFC | AC Voltage | - 100 - 240V, 60-50Hz, 6.3-3.2 Amp
| +5V | | +5V standby | | +12V | | -12V | | +3.3V | | | | CPU | - Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ±12V, +5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
| FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
- PECI
| LED | - CPU / System Overheat LED
- Standby alert LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- SMBIOS 2.3
- USB Keyboard support
| |