 | |
 | | SKU | | | | | | | Form Factor | | ATX |  | | Dimensions | | 12" x 9.5", (30.5cm x 24.1cm) | | | | | CPU | | • Single mPGA478 ZIF Sockets
• Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition)
• Supports an Intel® Pentium® 4 processor with 1MB of integrated Advanced Transfer Cache up to 3.2GHz
• Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.8GHz
• Hyper-threading enabled | | | System Bus | | 800 / 533 / 400MHz system bus | | | | | Memory Capacity | | • Four 184-pin DIMM sockets
• Supports up to 4 GB of DDR400/333/266 memory
• Dual channel memory bus
• Memory must be populated in pairs | | | Memory Type | | DDR400/333/266 (ECC or non-ECC) unbuffered SDRAM, 184-pin gold-plated DIMMs | | | DIMM Sizes | | 128MB, 256 MB, 512 MB, 1 GB | | | Memory Voltage | | 2.5 V only | | | | | Chipset | | • Intel® E7210 (Canterwood ES) chipset
• MCH + 6300ESB + FWH | | | SCSI | | • Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI | | | RAID | | Support for Zero-Channel RAID Optional: (Card not included) | | | Serial ATA | | • SATA Controller on-chip (Intel® 6300ESB)
• Dual Serial ATA ports
• RAID 0, 1 Supported | | | Network Controllers | | • 1x Intel® 82547GI CSA Gigabit Ethernet Controller
• 1x Intel® 82541 Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | | PCI Expansion | | • 2x 64-bit 66MHz PCI-X (3.3V) slots
• 2x 32-bit 33MHz PCI (5V) slots | | | IDE | | • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | | Floppy | | 1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | | USB | | • 2x USB 2.0 / 1.1 ports
• 1x USB header supports additional 2x USB 2.0 / 1.1 ports) | | | Serial Ports | | 2x Fast UART 16550 serial ports | | | VGA Port | | 1x VGA Port | | | Parallel Port | | 1x ECP/EEP Parallel Port | | | LAN Port | | 2x RJ45 Ports | | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | | | 1U Chassis | | • SC813MS-300C | | | 2U Chassis | | • SC822S-400LP | | | Rackmount Tower / 4U | | • SC742S-420 | | | Important Note | | To ensure system stability, a 300W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. | | | | | BIOS Type | | 8Mb Flash EEPROM with AwardBIOS® | | | BIOS Features | | • Plug and Play (PnP)
• APM 1.2
• DMI 2.3 support
• PCI 2.3
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support | | | | | Software | | • SuperDoctor® III
• Watch Dog | | | Power Configurations | | • ACPI/APM Power Management
• Main Switch Override Mechanism
• Wake-On-Ring (WOR) header
• Wake-On-LAN (WOL) header
• Suspend to RAM (STR)
• Power-on mode control for AC power loss recovery
• Internal/External modem remote ring-on | | | | | Voltage | | • Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V
• Adjustable CPU clock frequency ratio settings (via BIOS) | | | FAN | | • Total of five 3-pin fan headers
• 3x fans with tachometer monitoring
• Status monitor with firmware/software on/off control | | | Temperature | | • Monitoring for CPU, chassis, environment
• CPU thermal trip support | | | LED | | • CPU Overheat LED
• System Overheat LED
• +5V standby alert LED
• Suspend-state indicator LED | | | Other Features | | • Chassis intrusion detection
• Chassis intrusion header | | |
