 |  | | MBD-X6QT8-O | - X6QT8 (Standard Retail Pack)
| | | | | Form Factor | | | Dimensions | - 16" x 14.3" (406.4mm x 363.2cm)
| | | |
| | CPU | - Quad 604-pin FC-mPGA4 Sockets
- Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below:
- Dual-Core Intel® Xeon® Processor 7100/7000 Series with 2MB L2 Integrated Advanced Transfer Cache
| | System Bus | | | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | | | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 64GB Registered ECC DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs and all be of same type
| | Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | | | Chipset | - Intel® E8501 chipset
- MCH + ICH5R + 2 PXH + 82571
| | SATA | - ICH5R SATA Controller
- RAID 0, 1, JBOD support
| | SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10, JBOD support
| | RAID | - Support for Zero-Channel RAID
- (Card NOT included)
| | IPMI | | | Network Controllers | - Dual Intel® 8257EB Single Port PCI-e Gigabit Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - ATI ES1000 SVGA PCI video controller with 16 MB of video memory
| | Super I/O | | | | | | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | | | | | Rackmount Tower / 4U | | | Important Chassis Notes | - To ensure system stability with Quad CPUs, a 1000W (minimum) ATX power supply
[8-pin (+12V), 8-pin (+12V) and 24-pin are required] - To ensure system stability with Cranford Dual Core CPUs, a (800W (TBD)minimum) ATX power supply
[8-pin (+12V), 8-pin (+12V) and 24-pin are required] - Chassis must have CPU mounting holes required for CPUs with this serverboard.
| | | | | PCI-Express | - 1 x8 (in x16) PCI-e slot
- 1 x4 (in x8) PCI-e slot
| | PCI-X | - 3x 64-bit 133MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
| | | | | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
| | | | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on Mode for AC Power Recovery
- Internal/External modem remote ring-on
| | | | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
| | FAN | - Total of nine 3-pin fan headers
- 9x fans with status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin Fans
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- I2C Temperature Sensing Logic
- Thermal Monitor 2 support
| | LED | | | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
