 | |
 | | MBD-X9SRD-F -B | | | | |
| | Form Factor | | | Dimensions | - 4.75" x 15.95", (12.06cm x 40.51cm)
| | | |
| | CPU | - Single Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600/1600
and E5-2600/1600 v2 family†
(up to 12 cores and up to 130W) | | Note | † BIOS version 3.0 or above is required | | | | | Memory Capacity | - 4x 240-pin DDR3 DIMM slots
- Supports up to 128 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1866/1600/1333/1066 MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SATA | - 1x SATA DOM
- SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - 1x Realtek RTL8201N PHY (dedicated IPMI)
| | VGA | | | | | | Serial ATA | - 2x SATA 3.0 ports (6Gb/s)
| | LAN | - 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x internal USB (via header)
| | VGA | | | Serial Port / Header | - 2x Fast UART 16550 serial port
(one header and one rear port) | | DOM | - 1x DOM (Disk on Module) power connector
| | TPM | | | | | |
| | 3U Chassis | | | Important Chassis Notes | - To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
| | | |
| | PCI-Express | - 1x PCI-E 3.0 x8 LP slot (for AOC-CGP-I2-O-P)
- 1x PCI-E 3.0 x8 connector
| | | |
| | BIOS Type | - 32Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
| | | |
| | Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
| | Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Suspend to RAM (STR)
| | | | | Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
| | Temperature | - CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
- UID/Remote UID
| | Other Features | | |
