| | MBD-PDSMA-O | - PDSMA (Standard Retail Pack)
| MBD-PDSMA-B | | | | Form Factor | | Dimensions | - 12.0" width x 9.6 " length , (30.5cm x 24.4cm), 6 layers
| | | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor with 256KB L2 Cache
- Hyper-Threading (HT) capable
- 2MB / 1MB L2 Cache
- Will not support E2000 processors
| System Bus | - 1066 / 800 / 533 MHz system bus
| | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC DDR2 667/533 MHz memory (Dual Channel)
| Memory Type | - DDR2 667/533MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| Memory Voltage | | | | Chipset | - Intel E7230 (Mukilteo) Smithfield chipset
- ICH7/R + PXH-V + Intel® 82573E/L
| Serial ATA | - Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only) - Adaptec:
RAID 0 (Two, three, four drives only) RAID 1 (Two hard drives only) | IPMI | | Network Controllers | - 1x Intel® 82573V Gigabit PCI-Express Ethernet
- 1x Intel® 82573L Gigabit PCI-Express Ethernet
- Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
| VGA | - On-board ATI RageXL graphics, 8MB
| Super I/O | | Clock Generator | | | | Serial ATA | - Four Serial ATA ports (3.0 Gbps performance)
- Four SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- IDE Master / Slave 2 ports
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- White Connector for Compact Flash (CF, 40--pin IDE connector) Card Only
| Floppy | - 1 Floppy controller; 1.44 MB
| LAN | | USB | - 6x USB 2.0 compliant / 1.1 compatible
- 2x internal USB headers for 4 ports
- 2x USB Rear Ports
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Header
| Parallel Port | | | | | | 3U / Mid-Tower | | 4U / Tower | | | | PCI | - 5x 32-bit 33MHz PCI (5V) slots
| PCI-X | - 1x 64-bit PCI-X 133MHz Slot
| PCI-Express | | | | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0 (limited)
- USB Keyboard support
- SMBIOS 2.3
- BIOS rescue hot keys
| | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
| | | CPU | - Monitors for CPU Cores, +1.5V, +3.3V, +5V, ±12V, +5V Standby, VBAT
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio
| FAN | - 6 proprietary fan headers
- Total of six 4-pin fan headers
- 6 fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
| LED | - CPU / System Overheat LED
- Standby Voltage Alert LED
- Suspend-state indicator LED
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
- Lead-Free (Not 100%)
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | FCC | - Passed to meet FCC standard requirement
| |