| | SKU | | | | | Form Factor | | Extended ATX | | Dimensions | | 12" x 11", (30.5cm x 27.96cm) | | | | CPU | | Dual FCPGA370 ZIF Sockets Supports an Intel® Pentium® III processor with 512KB of integrated Advanced Transfer Cache up to 1.4GHz | | System Bus | | 133MHz / 100MHz system bus | | | | Memory Capacity | | Four 184-pin DIMM 25° sockets Supports up to 4 GB of DDR 266 / 200 MHz memory | | Memory Type | | DDR 266 / 200 MHz 72-bit SDRAM, 184-pin gold-plated DIMMs | | DIMM Sizes | | 64 MB, 128 MB, 256 MB, 512 MB, 1 GB | | Memory Voltage | | 2.5 V only | | | | Chipset | | VIA Apollo Pro 266T chipset VT8653T + VT8233 | | SCSI | | Adaptec AIC-7899W Controller Dual-Channel Ultra160 SCSI | | RAID | | Support for Zero-Channel RAID with Adaptec 2005S ZCR Card (Card NOT included) | | Network Controllers | | Dual Intel® 82559 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, RJ45 output | | Graphics | | ATI Rage XL SVGA PCI video controller with 8 MB of video memory | | | | PCI Expansion | | 3x 32-bit 33MHz PCI (5V) slots | | IDE | | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | USB | | Up to 4 USB ports | | Serial Ports | | 4 Fast UART 16550 serial ports | | Parallel Port | | 1 ECP / EEP Parallel Port | | Floppy | | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support | | Keyboard / Mouse | | PS/2 keyboard and mouse ports | | | | | | 1U Chassis | | SC811-SCA | | 2U Chassis | | SC822R-400RC | | Important Note | | To ensure system stability, a 250W (minimum) ATX power supply [24-pin] is required. | | | | BIOS Type | | 4Mb Flash EEPROM with Award® BIOS | | BIOS Features | | Plug and Play (PnP) APM 1.2 DMI 2.1 PCI 2.2 ACPI 1.0 BIOS rescue hot keys Hardware BIOS virus protection USB Keyboard support | | | | Software | | SuperDoctor® III Watch Dog | | Power Configurations | | ACPI/APM Power Management Real Time Clock Wake-up Alarm Main Switch Override Mechanism Wake-On-LAN (WOL) header Power-on mode control for AC power loss recovery Internal/External modem remote ring-on | | | | Voltage | | Monitors for CPU Cores, +3.3V, +5, ±12V CPU Core auto-switching voltage regulator with auto-sense from 1.3V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) | | FAN | | Total of seven 3-pin fan headers 4x fans with tachometer monitoring Status monitor with firmware/software on/off control | | Temperature | | Monitoring for CPU, chassis, environment | | LED | | CPU Overheat LED System Overheat LED Suspend-state indicator LED | | Other Features | | Chassis intrusion detection Chassis intrusion header | | |