 | |
 | | MBD-X7SPT-DF-D525+ -B | - X7SPT-DF-D525+ (Bulk Pack)
| | | | | Form Factor | | | Dimensions | - 6.8" x 16.4" (17.27cm x 41.66cm)
| | | | | CPU | - Intel® Atom™ D525 processor
| | System Bus | | | | | | Memory Capacity | - Two 200-pin SO-DIMM slots
- Up to 4GB unbuffered non-ECC DDR3 800MHz SO-DIMM (Single Channel)
Some 1066MHz & 1333MHz DDR3 memory can be used, but will operate at 800MHz
Note: Supports 1-Gb and 2-Gb devices only - Intel D525 Memory Requirements | | Memory Type | - DDR3 800MHz unbuf., non-ECC SO-DIMM
| | DIMM Sizes | - 2 GB, 1 GB, 512 MB, 256 MB
| | Memory Voltage | | | | | | Chipset | - Intel ICH9R Express
- Intel 82574L
| | SATA | - Intel ICH9R for SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
| | Network Controllers | - Dual Intel 82574L Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
| | Graphics | - Onboard Matrox G200eW graphics
| | Super I/O | | | | | | Serial ATA | - 3x SATA ports (3Gb/s) via hot-plug slot
- 1x SATA port on board
| | USB | - 2 USB 2.0 ports
(2 more ports for OEM option) | | LAN | | | IPMI | - Integrated IPMI 2.0 with dedicated LAN
| | DOM | - 1x DOM (Disk on Module) power connector
| | Others | - Optional 2x COM port headers
- TPM 20-pin header ready
| | | | | BIOS Type | - AMI BIOS, 8Mb SPI Flash ROM
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
| | | | | | 2U Chassis | | | | | | Software | - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
| | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Suspend to RAM (STR)
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
| | | | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
- CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| | FAN | - 2 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion Header
- SDDC Support
| | | |
| | Environmental Spec. | - Operating Temperature: 0°to 55°C
- Non-operating Temperature: -40°to 70°C
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | |
| | FCC | | |
