 | |
 | | MBD-H8SME-F | | | | |
| | Form Factor | | | Dimensions | - 4.6" x 11.7" (29.72cm x 11.68cm)
| | | | | CPU | - Single 942-pin Socket AM3+
- Supports up to Single 8/4-Core ready AMD Opteron™ 3000 Series processor
- HT3.0 Link support
| | Chipset | - AMD chipset SR5650 / SP5100
| | | |
| | Memory Capacity | - Supports up to 32GB Unbuffered ECC/non-ECC VLP DDR3 1600/1333/1066 SDRAM in 4 DIMMs
- Single or Dual (recommended) channel memory
| | Memory Type | - VLP DDR3 1600/1333/1066MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | | |
| | SATA | | | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
| | VGA | - Matrox G200eW 16MB DDR2 graphics
| | Super I/O | | | | |
| | SATA | | | USB | - 2x USB 2.0 via KVM connector
| | VGA | - VGA port via KVM connector
| | Serial Ports | - 1 Fast UART 16550 serial port via KVM connector
| | IPMI | - 1x dedicated IPMI LAN port
| | | | | |
| | PCI-Express | - 1 Micro LP PCI-E 2.0 x8 slot
| | | |
| | BIOS Type | - 16Mb SPI Flash ROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
| | | |
| | CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| | | | RoHS
|
 | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | |
| | FCC | - Passed to meet FCC standard requirement
| |
Doctor III