 | |
 | | MBD-H8DGU-LN4F+ | | | | | | Form Factor | | | Dimensions | - 12.8" x 16.5" (32.51cm x 41.91cm)
| | | | | CPU | - Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
| | Chipset | - AMD chipset SR5690 / SP5100
| | | | | Memory Capacity | - 24 DIMM sockets
- Supports up to 768GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 24 DIMMs
- Quad channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
| | Memory Type | - DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | SATA | - AMD SP5100 (RAID 0, 1, 10)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
| | Network Controllers | - 2x Intel® 82576 controller, Dual-Port
Gigabit Ethernet - 10/100/1000BASE-T support
| | VGA | | | Super I/O | | | | | | SATA | | | LAN | - 4 RJ45 LAN ports
- 1x RJ45 Dedicated LAN supports IPMI
| | USB | - 7x USB 2.0 ports
- 2x Rear, 2x header(4 ports), 1x Type A
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial port
- 1 serial port header
| | Others | - 1UID, 1 SATA DOM power connector, TPM header
| | | | | PCI-Express (Gen 2.0) | - 1U Left Slot:
1 PCI-E 2.0 x16 and UIO or
2 PCI-E 2.0 x8 or
1 PCI-E 2.0 x16 or
1 PCI-E 2.0 x8 and UIO
- 2U Left Slot:
2 PCI-E 2.0 x8 and UIO or
3 PCI-E 2.0 x8 or
1 PCI-E 2.0 x16 and UIO
- 2U Right Slot:
3 PCI-E 2.0 (x4 + x1 + x1)
(via RSC-R2UU-2E2E4R Riser Card)
(See Optional Part List)
| | | | | | | BIOS Type | - 16Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
| | | | | Software | | | Power Configurations | - ACPI Power Management
- Power-on mode control for AC power loss recovery
| | | | | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
| | FAN | - Total up to 8-fan status tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
- UID/Remote LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | | RoHS
|
 | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | | | FCC | - Passed to meet FCC standard requirement
| |
Doctor III