Question When we download H11DSi BIOS package for the update, there is no any batch file like “AMI” or “Flash” to do the update, any suggestion? Answer Please note that H11 no longer support update BIOS under dos or legacy environment, and you can see the “flash.nsh” file in the package, which was the batch file under UEFI environment. 1. Save the BIOS update package to your computer. 2. Extract the files from the UEFI folder of the BIOS package to a USB stick. (Note: The USB stick doesn't have to be bootable, but has to be formatted with the FAT/FAT32 file system.) 3. Plug the USB stick into a USB port, boot to the Build-In UEFI Shell 4. Type FLASH.nsh BIOSname#.### to start the BIOS update: Shell> fs0: fs0:\> cd UEFI fs0:\UEFI> flash.nsh H11DSU7.728 4. Do not interrupt the process until the BIOS update is complete. 5. Perform an A/C power cycle after the message indicating the BIOS update has completed. 6. Go to the BIOS configuration, and restore the BIOS settings. Was this FAQ helpful? YES      NO Enter Comments Below: Note: Your comments/feedback should be limited to this FAQ only. For technical support, please send an email to support@supermicro.com. Enter your email address below if you'd like a technical support staff to reply: FAQ Stats FAQ ID Related Category / Keyword Date Posted Code 26421 N/A 09/01/17     Print Answer