![](https://www.supermicro.com/a_images/pixel.gif) | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | MBD-H8DCT-HIBQF | - H8DCT-HIBQF (Standard Retail Pack)
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Form Factor | | Dimensions | - 6.8" x 16.64" (16.4cm x 42.3cm)
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | CPU | - Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD Opteron 4000 Series processors
- HT3.0 Link support
| Chipset | - AMD chipset SR5690 + SP5100
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Memory Capacity | - 12 DIMM sockets
- Support up to 192GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs slots
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
| Memory Type | - DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Infiniband | - Mellanox Connect-X2 QDR Infiniband 40Gbps Controller
| SATA | - AMD SP5100 (RAID 0, 1, 10)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
| Network Controllers | - Intel® I350 Dual Gigabit Ethernet LAN controller
- 10/100/1000BASE-T support
| VGA | | Super I/O | | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | SATA | | LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
| USB | - 4x USB 2.0 ports
- 2x Rear, 1x header (2 ports)
| VGA | | Serial Ports | - 1x Fast UART 16550 serial port
| Others | | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | PCI-E | - 1 PCI-E 2.0 x16
- 1 PCI-E 2.0 x8 (in x4 slot)
for SMC SAS adapter card support | | ![](https://www.supermicro.com/a_images/pixel.gif) | ![](https://www.supermicro.com/a_images/pixel.gif) | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | 2U Twin & 2U Twin^2 | - SC827H, SC827HQ/HD, SC217HQ/HD
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | BIOS Type | - 16Mb SPI Flash ROM with AMI® BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | Software | | Power Configurations | - ACPI Power Management
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
| FAN | - Up to 3-fan status tachometer monitoring
- Up to three 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only) - Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan connectors
- I2C Temperature Sensing Logic
| LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | RoHS |
| Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | ![](https://www.supermicro.com/a_images/boxes/line_yellow.gif) | FCC | - Passed to meet FCC standard requirement
| |