 | |
 | | MBD-H8SML-iF | - H8SML-iF (Standard Retail Pack)
| | | |
| | Form Factor | | | Dimensions | - 9.6" x 9.6 " (24.4cm x 24.4cm)
| | | | | CPU | - Single 942-pin Socket AM3+
- Supports up to Single 8/4-Core ready AMD Opteron™ 3000 Series processor
- HT3.0 Link support
| | Chipset | - AMD chipset SR5650 / SP5100
| | | |
| | Memory Capacity | | | Memory Type | - DDR3 1600/1333/1066MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | | |
| | SATA | | | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
| | Network Controllers | - Intel 82574L single-port Gigabit Ethernet, 10/100/1000Base-T support
| | VGA | - Matrox G200eW 16MB DDR2 graphics
| | Super I/O | | | | |
| | SATA | | | USB | - 7x USB 2.0 ports (2x rear / 2x header - 4 ports / 1x type A)
| | VGA | | | Serial Ports | - 2 Fast UART 16550 serial ports
- 1 header & 1 port
| | IPMI | - 1x dedicated IPMI LAN port
| | | | | |
| | PCI-Express | - 1 PCI-E 2.0 x8 (in x16 slot)
- 1 PCI-E 2.0 x4 (in x8 slot)
- 1 PCI-E 2.0 x8
| | | |
| | BIOS Type | - 16Mb SPI Flash ROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
| | | |
| | CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, -12V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
| | FAN | - Up to 5-fan status tachometer monitoring
- Up to five 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only) - Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x fan connectors
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | | RoHS
|
 | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | |
| | FCC | - Passed to meet FCC standard requirement
| |
Doctor III