H8DI3+-F
Supermicro, Inc.

   
  A+ Products   Motherboards   [ H8DI3+-F ]
H8DI3+
Key Features
1. Two Six-Core / Quad-Core
    AMD Opteron™ 2000 Series (Socket
    F) support; HT3.0 Link support
2. AMD SR5690 + SP5100 Chipset
3. Up to 128GB Reg. ECC DDR2
    800/667/533 SDRAM in 16 DIMM
4. Two Intel® 82574L controllers,
    Dual-Port Gigabit Ethernet
5. 6x SATA2 3.0Gbps Ports via
    AMD SP5100 controller, RAID 0, 1, 10
6. 2x PCI-e 2.0 x16 (x8 signals),
    1x PCI-e 2.0 x8 (x4 signals),
    1x PCI-e 2.0 x8,
    2x PCI-X 133/100
7. LSI 1068E 8 port SAS controller,
    RAID 0, 1, 10; RAID 5 Optional
8. IPMI 2.0 with dedicated LAN Support
9. 8x Fans with Speed Control
10. Integrated Matrox G200eW Graphic

 
Links & Resources
Tested Memory List
Tested HDD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities

RoHS 5/6    

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-H8DI3+-F-O
  • H8DI3+-F (Standard Retail Pack)
MBD-H8DI3+-F-B
  • H8DI3+-F (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12" x 13.05" (30.5cm x 33.2cm)
 
Processor/Chipset
CPU
  • Dual 1207-pin Socket F
  • Supports up to two Six-Core / Quad-Core AMD Opteron™ 2000 Series processors**
  • HT3.0 Link support
Chipset
  • AMD chipset SR5690 + SP5100
 
System Memory
Memory Capacity
  • Sixteen 240-pin DIMM sockets
  • Support up to 128GB DDR2 800/667/533 MHz memory *
  • Dual channel memory bus
  • Single or Dual (recommended) channel memory support
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8V only
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
SAS
  • LSI 1068E 8 port SAS controller
  • RAID 0, 1, 10; RAID 5 Optional
  • IButton68 (Optional: AOC-IButton68)
      RAID 5 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Two Gigabit Ethernet Intel® 82574L controller, Dual-Port
  • 10/100/1000BASE-T support
VGA
  • Matrox G200ew 16MB DDR2
Super I/O
  • Winbond® 83627DHG chip
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
SAS
  • Integrated LSI 1068E SAS Controller ^
  • Eight Serial Attached SCSI (SAS) ports
  • Each SAS port supports up to 4 SAS / SATA drives
IDE
  • Single EIDE channel support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA 100/133
LAN
  • 2 RJ45 LAN ports
Floppy
  • 1 Floppy port, 1.44 MB
USB
  • 6x USB 2.0 ports
  • 2x Rear / 2x header / 2x type A
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
Others
  • 1 SATA DOM power connector
 
Expansion Slots
PCI-Express
  • 2x PCI-e 2.0 x16 (x8 signals) slots
  • 1x PCI-e 2.0 x8 slot
  • 1x PCI-e 2.0 x8 (x4 signals) slot
PCI-X
  • 2x PCI-X 64-bit 133/100MHz slots
 
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 8-fan status tachometer monitoring
  • Up to eight 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control
     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

RoHS 5/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
OS Compatibility
• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
Motherboard MBD-H8DI3+-F 1 H8DI3+-F Motherboard:
MBD-H8DI3+-F-O (retail) / MBD-H8DI3+-F-B (bulk)
Retention BKT-0012L 2 RETENTION MODULE FOR AMD CPU SOCKET F,ROHS
I/O Cable 1 CBL-0044 4 2 FT AMPHENOL SERIAL ATA CABLE
I/O Cable 2 CBL-0097L-02 2 79536-3220,50CM IPASS TO 4 SATA,PB FREE
I/O Cable 3 CBL-010 1 9 PIN SERIAL PORT DTK CABLE
I/O Cable 4 CBL-022 1 ATX FLOPPY CABLE 3 HEADERS
I/O Cable 5 CBL-036L-03 1 18" ATA 133/100/66 3-DROP TPE CABLE, PBF
Driver Disk CDR-APLUS 1 CDR-APLUS FOR AMD BASED MB
I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)

  * Fully populated DDR2 667 or 800 will be downgraded to DDR2 533
  ^ Onboard SAS controller can support SR and IT mode, but not IR mode
  ** Opteron 237x, 238x, 239x, and 24xx supported
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed:
AMD, AMD Motherboard, AMD Opteron, Opteron 2000, Opteron, SocketF, Socket F