 | |
 | | MBD-H8DMT+-B | | | | |
| | Form Factor | | | Dimensions | - 16.64" x 6.8" (42.3cm x 17.3cm)
| | | | | CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
| | | - Two Hyper-Transport links between the CPUs
| | Chipset | | | Note: SE processors not recommended for 1U chassis | | | |
| | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 128GB DDR2 800/667/533 MHz memory *
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- For Single CPU: Memory must be populated in CPU1 DIMMS only
- Dual channel memory bus
| | Memory Type | - DDR2 800/667/533/400 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
| | Memory Voltage | | | | |
| | SATA | - nVidia MCP55V Pro SATA2 3.0Gbps Controller
- 4 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI Socket (SIMSO)
- (Optional: AOC-SIMSO(+) R 3.00) **
- RMM (Remote Management Module)
- (Card not included)
| | Network Controllers | - nVidia MCP55V Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | - XGI Z9S Graphics Controller
| | Super I/O | | | | | | SATA | | | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- 2x USB internal ports (Type A)
- Total of 6 USB 2.0 Compliant ports
| | VGA | | | Serial Port | | | | |
| | PCI-Express | - One PCI-Express (x16) Slot
| | IPMI | - IPMI 2.0 Expansion Socket
| | | | | |
| | BIOS Type | - 8Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
| | | |
| | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super
 Doctor III - Watch Dog
- NMI
| | Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
| | | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU switching voltage regulator
| | FAN | - Total of Four proprietary fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Status
- I2C Temperature Sensing Logic
| | LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
- SDDC Support
| | | | RoHS
|
 | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
