 | |
 | | MBD-H8SMU-O | - H8SMU (Standard Retail Pack)
| | MBD-H8SMU-B | | | | |
| | Form Factor | | | Dimensions | - 7.89" x 13 " (20.0cm x 33.0cm)
- 6 layers
| | | | | CPU | - Single 940-pin AM2 Socket
- Supports one Quad-Core AMD Opteron™ 1000 Series
(Socket AM2) processor
NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor | | System Bus | | | Chipset | | | | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB DDR2 800/667/533 MHz memory
- Single or Dual (recommended) channel memory
| | Memory Type | - DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | | |
| | SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 4 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
| | IDE | - Single EIDE channel
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100/133
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMSO)
- (Optional: AOC-SIMSO(+) R 3.00) **
- RMM (Remote Management Module)
- (Card not included)
| | Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | VGA | - ATI ES1000 Graphics Controller
16MB Graphics & VGA port | | Super I/O | | | | |
| | SATA | | | IDE | - Single ATA 133/100 EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA133/100
| | Floppy | | | LAN | | | USB | - 2 USB Rear Ports
- 2 USB Internal Headers
- 4 Total USB 2.0 Compliant, 1.1 Compatible
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1 Fast UART 16550 serial ports
- 1 Header
| | Others | - 1 SATA DOM power connector
| | | | |
| | Important Chassis Notes | - To ensure system stability, a 300W (minimum) ATX power supply
[4-pin (+12V) and 20-pin are required] | | | |
| | PCI-Express / UIO | - 1U Left Side:
1 (x8) PCI-Express & UIO Slots - 1U Right Side:
1 (x8) PCI-Express Slot | | | |
| | BIOS Type | - 4Mb Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- USB Keyboard support
| | | |
| | Software | | | Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
| | | |
| | CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, +5V Standby, VBAT
- CPU switching voltage regulator
| | FAN | - Total up to five 3-pin fan headers
- Support 3-pin fans (with speed control)
| | Temperature | - Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
| | LED | - CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
- UID/Remote UID LED
| | Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
| | | |
RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
Doctor III