 |
|
 |
| SYS-5035L-IB |
- SuperServer 5035L-IB (Black)
|
| |
|
| CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Core™2 Duo E4000 Series
- Supports an Intel® Pentium® E2000 Series
- Supports an Intel® Pentium® D 945, 935, 925, 915
and 820, 805
- Supports an Intel® Pentium® 4 600 and 500 Series
- Supports an Intel® Celeron® E1000 Series
- Supports an Intel® Celeron® 400 Series
- Supports an Intel® Celeron® D 300 Series
|
| System Bus |
- 1066 / 800 / 533 MHz system bus
|
| |
|
| Memory Capacity |
- Two 240-pin DIMM sockets
- Supports up to 2 GB of unbuffered, non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
|
| Memory Type |
- DDR2 667/533/400MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| |
|
| Chipset |
- Intel 945GC + ICH7R
- Realtek RTL8111C-GR
|
| SATA |
- Intel ICH7R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| Network Controllers |
- 2x Realtek RTL8111C-GR Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
| Graphics |
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| PCI-Express |
- 1 (x16) PCI-Express Slot
- 1 (x4) PCI-Express (in x8 slot)
|
| PCI |
- 2x 32-bit 33MHz PCI (5V) slots
|
| |
|
| Serial ATA |
- Four Serial ATA ports ( 3Gbps )
- Four SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| LAN |
|
| USB |
- 8x USB 2.0 / 1.1 compatible
- 2 rear + 2 Type A connector + 2 headers (4 ports)
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Serial Header
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports |
- 2x Front side USB ports (USB 2.0 ready)
|
| |
|
|
| Internal |
- 4x 3.5" tool-less HDD trays
|
| External |
- 2x 5.25" external drive bays
- 1x 3.5" external drive bay (OEM option)
|
| |
|
|
|
| Fans |
- 1x 9cm (rear) PWM fan w/ tool-less design
- 1x 8cm (front) cooling fan (optional)
|
| |
|
|
| 300W AC power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 50-60Hz, 5 Amp
|
| DC Output |
- 5V + 12V + 3.3V - 12V < 290W
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| Certification |
80 PLUS Bronze Certified
[ Test Report ]
|
| |
|
| CPU |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V/+5V Standby, VBAT, Memory, Chipset
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN |
- Total of five 4-pin fan headers
- 5 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 5 x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
|
| Other Features |
- Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|
|
