 |
|
 |
| SYS-5035G-T |
- SuperServer 5035G-T (Beige)
|
| SYS-5035G-TB |
- SuperServer 5035G-TB (Black)
|
| |
|
|
| CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor
- Hyper-Threading (HT) capable
|
| System Bus |
- 1066 / 800 / 533 MHz system bus
|
| |
|
|
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
|
| Memory Type |
- DDR2 667/533/400MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
|
|
| Chipset |
- Intel 955X (Glenwood)
- ICH7R + PXH-V + Intel® 82573V
|
| Serial ATA |
- Intel® ICH7R SATA (3 Gbps) controller built-in
- Host RAID 0, 1, 5, and 10 Support
|
| Network Controllers |
- Single-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa)
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
| Audio |
- AC'97 audio CODEC with high quality 6-channel sound
|
| Super I/O |
|
| |
|
|
| PCI-Express |
|
| PCI-X |
- 2x 64-bit 133MHz PCI-X (3.3V) slot
|
| PCI |
- 3x 32-bit 33MHz PCI (5V) slot
|
| |
|
|
| Serial ATA |
- Four Serial ATA ports ( 3Gbps performance)
- Four SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- 8x USB 2.0 compliant / 1.1 compatible (6x ports + 2x headers)
- 2 in front (FUCI), 6 in rear
|
| Audio |
- 1x Line In / Line Out / Microphone ports
- Front Panel Header
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Serial Header
|
| Parallel Port |
|
| |
|
|
| BIOS Type |
- 8Mb Flash EEPROM with AwardBIOS®
|
| BIOS Features |
- User Over-Clock in System BIOS
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
|
|
|
|
|
|
| Form Factor |
Mid-Tower |
| Model |
SC733T-450 |
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports |
- 2x Front side USB ports (USB 2.0 ready)
|
| |
|
|
| Hot-swap |
- 4x 3.5"Serial ATA hot-swap drive bays
|
| Peripheral Bay |
- 2x 5.25" peripheral drive bay
- 1x 3.5" bay for floppy drive
|
| |
|
|
| Floppy |
- TEAC 3.5" 1.44MB Floppy Drive
|
| |
|
|
| Fans |
- 1x 12cm rear exhaust fan
- 1x 9cm mounted thermal cooling fan
- 2x 8cm fans (450W power supply configuration)
|
| |
|
|
| 4 x 3.5" SATA Backplane |
| |
|
|
| 450W low-noise AC power supply with redundant cooling feature (with PFC) |
| AC Voltage |
- 100 - 240V, 50/60Hz, 10 Amp
|
| DC Output |
- 5V + 3.3V ≤ 160W
- 12V1 + 12V2 + 12V3 ≤ 34 Amp
|
| +5V |
|
| +5V standby |
|
| +12V1 |
|
| +12V2 |
|
| +12V3 |
|
| -12V |
|
| +3.3V |
|
| |
|
|
| CPU |
- Monitors for CPU Cores, +1.5V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio settings (via BIOS)
|
| FAN |
- Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Support 4-pin PWM fan (with speed control)
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
|
| LED |
- CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- Lead Free (not 100%)
|
|
