 | |
 | | SYS-F627G3-FT+ | - SuperServer F627G3-FT+ (Black)
| | | | | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 130W TDP) | | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | | | GPU/Xeon Phi Support | - 3x Double-width GPU/Xeon Phi per node
(total of 12x GPU/Xeon Phi cards in 4U) - Supports Intel Xeon Phi
- Supports NVIDIA K80, K10/K20/K20X (Kepler), K1/K2, and M2090/M2075
| | | | | Memory Capacity | - 16x 240-pin DDR3 DIMM slots
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | AHCI SATA | - SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1 | | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
| | Graphics | | | | | | AHCI SATA | - 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
| | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x USB 2.0 ports; 1x internal Type A
| | VGA | | | Serial Port / Header | | | | | |
| | Form Factor | | | Model | | | | |
| | Width | | | Height | | | Depth | | | Package | - 25.6" (W) x 11.8" (H) x 48.0" (D)
| | Weight | - Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
| | Available Colors | | | | |
| | Buttons | - Power On/Off button
- UID button
| | LEDs | - Power status LED
- System Overheat / Power Fail LED
- UID LED
| | | | | PCI-Express | - 3x PCI-E 3.0 x16 slots
(support 3x Double-width GPU/Xeon Phi) - 2x PCI-E 3.0 x8 slots
| | | |
| | Hot-swap | - 2x 3.5" Hot-swap SATA HDD bays
| | | |
| | Fans | - 8x 8cm heavy duty fans with air shroud and PWM fan speed control
| | | |
| 1620W high-efficiency redundant power supply w/ PMBus | | AC Input | - 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
| | DC Output | - 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
| | Certification |   Platinum Certified
[ Test Report ] | | | | | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
