 | |
 | | SYS-7046GT-TRF | - SuperServer 7046GT-TRF (Black)
| | | | | CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP) | | QPI | | | GPU | - Supports 4x Nvidia Fermi C2050, C2070, or C2075 GPU Cards
| | | | | Memory Capacity | - 12x 240-pin DIMM slots
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
| | Memory Type | - 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | | | Chipset | - Dual Intel® 5520 (Tylersburg) chipset
- ICH10R
| | SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| | Network Controllers | - Intel® Dual 82574L Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | | | Super I/O | | | | | | PCI-Express | - 4 (x16) PCI-E 2.0 slots
- 2 (x4) PCI-E 2.0 (in x16 slots)
- 1 (x4) PCI-E (in x8 slot)
| | PCI | | | | | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | LAN | | | USB | - 4x USB rear ports
- 2x USB on-board
- 1x USB internal header - 2 ports
- Total 8 USB 2.0 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
| | | | | BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
| | | | |
| | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
| | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Package | | | Available Color | | | | |
| | Buttons | - LED Power On/Off button
- System Reset button
| | LEDs | - Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
| | Ports | | | | |
| | Hot-swap | - 8x 3.5" Hot-swap SAS/SATA Drive Bays
- Supports up to 6 SATA Drives
| | Peripheral Bay(s) | - 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
| | | |
| | SAS / SATA Hard Drive Backplane with SES2 | | | | |
| | Fans | - 4x 5000 RPM Hot-swap Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust Fan
| | | | | 1400W high-efficiency (1+1) redundant power supply with PMBus | | AC Input | - 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
- 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
| | DC Output | - 1100W: +12V/92A; +5Vsb/4A
- 1400W: +12V/116A; +5Vsb/4A
| | With Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
| | Certification | 
Gold Certified
[ Test Report ] | Note: Does not support redundancy for 100-140Vac,
will need two 1200W modules to operate.
| | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| | FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | RoHS
| | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
