 | |
 | | SYS-6035B-8 | - SuperServer 6035B-8 (Beige)
| | SYS-6035B-8B | - SuperServer 6035B-8B (Black)
| | | |
| | CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below: - Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz - NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors
| | System Bus | - 1333 / 1066 / 667 MHz system bus
| | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | |
| | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
| | Memory Type | - 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® 5000P (Blackford) chipset
- MCH + PXH + ESB2
| | SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| | SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, & 10 support
| | RAID | - Support for Zero-Channel RAID
- Optional: (Card not included)
- RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLC)
| | Network Controllers | - Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Graphics | - ATI ES1000 controller with 16 MB of video memory
| | Super I/O | | | | |
| | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| | LAN | | | USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | Parallel Port | - 1 ECP / EEP parallel port
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
- Alarm Mute Switch
| | LEDs | - Power LED
- Network activity LED
- System Overheat LED
| | Ports | - (Optional front USB ports via 5.25" Drive bay)
| | | |
| | PCI-Express | - 2 (x8) PCI-e slots
- 1 (x4) PCI-e (using x8) slot
| | PCI-X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
- 1x 64-bit 100MHz PCI-X (3.3V) slot
| | | |
| | Hot-swap | - 8x 3.5"SCA Ultra320/160 Hot-swap Drives
| | Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
| | | |
| | DVD-ROM | - Panasonic 8x DVD, 24x CD, DVD-ROM Drive
| | Floppy | - TEAC 3.5" 1.44MB Floppy Drive (beige / black)
| | | |
| | Dual Channel SCSI Backplane w/ Enclosure Management (SAF-TE) | | | |
| | Fans | - 4x 9cm 5,000 RPM Hot-swappable Fans
- 2x 8cm 5,000 RPM Rear Exhaust Fans
| | Shroud | | | | |
| 550W power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V ] | | AC Voltage | - 100 - 240V, 47-63Hz, 9/3.5 Amp
| | DC Output | | | +5V | | | +5V standby | | | -5V | | | +12V | | | -12V | | | +3.3V | | | | |
| | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
| | | |
| Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
