| | SYS-6024H-TR | - SuperServer 6024H-TR (Beige)
| SYS-6024H-TRB | - SuperServer 6024H-TRB (Black)
| | | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| System Bus | | Operating System Software | | | | Memory Capacity | - Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 333MHz memory, or
- Supports up to 32 GB DDR 266MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| Memory Type | - DDR 333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
- Memory Sparing / Mirroring
| | | Chipset | - Intel® E7520 chipset
- MCH + 6300ESB + PXH/V +82541GI
| SATA | - Marvell® 88SX6081 8-port SATA Controller
- RAID 0, 1, JBOD support
| SATA | - 6300ESB 2-port SATA Controller
- RAID 0, 1, JBOD support
| Zero Channel RAID | - Support for Zero-Channel RAID
- (Card not included)
| IPMI | | Network Controllers | - 2x Intel® 82541GI Single Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Graphics | - ATI Rage XL SVGA PCI video controller with 8MB of video memory
| Super I/O | | Clock Generator | | | | Serial ATA | - Ten Serial ATA ports
- Up to ten SATA hard drives supported
- 6300ESB - 2 SATA ports
- Marvell 885X6081- 8 SATA ports
| IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
| ZCR | - Adaptec 2020SA (Card not included)
| LAN | | USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 2 Fast UART 16550 serial ports
| Parallel Port | - 1 ECP/EEP parallel port
- 1 parallel port header
| | | | | Height | 3.5" (89mm) | Width | 16.8" (426mm) | Depth | 25.6" (650mm) | Gross Weight | 55.5 lbs (25.2kg) | Available Colors | Beige, Black | | | Buttons | Power On/Off button System Reset button | LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED | Ports | none | | | - 6x low-profile expansion slots
| PCI-Express | | PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
| PCI | - 1x 32-bit 33MHz PCI (5V) slot
| | | Hot-swap | 6x 3.5" Hot-swap drive trays | Peripheral Bay(s) | 1x 5.25" full-height peripheral bay | | | Floppy | - Panasonic 3.5" 1.44MB Floppy Drive
| CD-ROM | - TEAC Slim 24x CD-ROM drive
| | | 1x 2U SATA backplane | | | Fans | 4x 80mm 6300 RPM fans Cooling redundancy with fan shroud | | | 500W (1 + 1) Redundant AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V) ] | AC Voltage | 100 - 240V, 50/60Hz, 10 Amp | DC Output | 5V + 3.3V ≤ 160W 12V Total ≤ 39 Amp | +5V | 30.0 amp | +5V standby | 2.0 amp | +12V1 | 15.0 amp | +12V2 | 15.0 amp | +12V3 | 18.0 amp | -12V | 1.0 amp | +3.3V | 21.0 amp | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V & +5V Standby
| FAN | - Four 4-pin fan headers
- Four 3-pin fan headers
- 8x fans with status tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Support 3-pin fans
- Pulse Width Modulated (PWM) fan connector
| Temperature | - Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal control for 8x fan connectors
- PC temperature sensing logic
- Thermal Monitor 2 (TM2) support
| LED | - CPU / System Overheat LED
- Suspend-state indicator LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
| |