 | |
 | | SSG-2027B-DE2R24L | - SuperStorage 2027B-DE2R24L (Black)
| | | |
|
2x Super X9DBS-F-2U | | | |
| | CPU | - Dual Socket B2 (LGA 1356)
- Intel® Xeon® processor E5-2400 v2
- Up to 95W TDP
| | Cache | | | System Bus | | | | | | Memory Capacity | - 6x 240-pin DIMM slots
- Supports up to 192GB DDR3 ECC Registered memory
- Memory Mirroring supported
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- NVDIMM support. (Not all vendor's NVDIMM are supported. Please contact your sales representative for details)
| | DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB , 32GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | | | Chipset | | | SAS/SATA* | - Broadcom 2308 SAS2 (6Gbps)
| | SAS2 Expander | - Scalability through cascading
- 6Gb SAS2/SATA2 HDD support
- Inband SES-2 Enclosure Management
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Dual-Port Gigabit Ethernet Controller
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
| | Graphics | | | Super I/O | | | Others | - PCI-E 3.0 x8 node to node/NTB connectivity
- PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA required
| | | | | PCI-Express | - 3x PCI-E 3.0 x8 slots (on riser)
| | | | | SAS | - 1x JBOD expansion port per node
(mini-SAS HD) | | LAN | | | USB | - 2x USB rear ports (via KVM cable)
- 1x USB on-board (TypeA)
| | VGA | - 1x VGA Port (via KVM cable)
| | Serial Port / Header | - 1x console port (via KVM cable); Board to Board serial port connection available for management
| | | | | BIOS Type | - 16MB SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.3
- ACPI up to 5.0
- USB Keyboard support
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
- Alarm Mute Switch
| | LEDs | - Power LED
- Hard Drive Activity LED
- 2x Network Activity LED
- System Overheat LED
- Power Fail LED
| | | |
| | Hot-swap | - 24x Hot-swap 2.5" Drive Bays shared between server nodes
- SAS or enterprise SATA HDD only recommended
- SATA drives require Broadcom interposer
| | | |
| SAS2 dual Expander Backplane, features:
• Scalability through cascading
• 6Gb SAS2/SATA2 HDD support
• Inband SES-2 Enclosure Management
• Redundancy dual ported SAS architecture
• Robust AirMax server node connections (SBB specification) | | | | |
| | Fans | | | | |
| 920W Redundant High-Efficiency Power Supplies w/ Power Distributor, PMBus 1.2, I2C, and PFC | | AC Input | - 100-240 V, 50-60 Hz, 11-4.5 Amp
| | DC Output | - +5V standby: 4A
- +12V: 75A
| | With Power Distributor | - +5V: 45A
- +3.3V: 24A
- -12V: 0.6A
| | Certification |  Platinum Certified
[ Test Report ] | | | | | CPU | - Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Voltages.
- 5+1-switching voltage regulator
| | FAN | - Total of 10 fan headers supporting up to 10 fans
| | Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 10x fan connectors
- PECI
| | | RoHS
| | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
