| | SYS-5017A-EP | - SuperServer 5017A-EP (Black)
| Recommended Replacement | | | | CPU | - Intel® Atom® N2800 (2 Core) processor support
- 1MB, 1.8GHz, 2C/4T, HT, 64-bit, 6.5W
| | | Memory Capacity | - 2x 204-pin SO-DIMM slots
- Supports up to 4GB of non-ECC DDR3 1066MHz (Single Channel
- Some 1333MHz memory can be used, but memory capacity will operate at 1066MHz
| Memory Type | - 1066MHz DDR3 SO-DIMM, 204-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | | | | Chipset | - Intel® NM10 Express Chipset
| SATA | | Network Controllers | - Intel® 82574L dual-port Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Audio | - Realtek ALC888S-VD2 HD Audio
| Graphics | - Integrated Intel® GMA 3650
| USB 3.0 | | | | SATA | - 2x SATA 2.0 ports (3Gbps)
| LAN | | USB | - 2x USB 3.0 ports (2 rear)
- 6x USB 2.0 ports (2 rear)
| VGA | - HDMI, Display Port, VGA, LVDS
| Serial Port / Header | - 4x COM ports in headers (1 w/RS422/485)
| Others | - Audio header
- TPM 1.2 header
| | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Weight | - Net Weight: 8 lbs (3.62 kg)
- Gross Weight: 12 lbs (5.44 kg)
| Available Colors | | | | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Information LED (temp., status)
| | | PCI | - 1x 32-bit PCI slot (5.0V)**
| PCI-E | | | | HDD | - 2x 3.5" or 2x 2.5" internal SATA2 hard
drive bays (optional) * | | | 200W Low Noise AC-DC power supply with PFC | AC Voltage | - 100 - 240V, 50-60Hz, 2.6 Amp Max
| +5V | | +5V standby | | +12V | | -12V | | +3.3V | | Certification | Gold Certified | | | BIOS Type | - 64Mb SPI Flash EEPROM with AMI UEFI BIOS
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
| | | RoHS
| | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |