| | SYS-5015P-TR | - SuperServer 5015P-TR (Beige)
| SYS-5015P-TRB | - SuperServer 5015P-TRB (Black)
| | | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor
- Hyper-Threading (HT) capable
- 1MB L2 Cache
| System Bus | - 1066 / 800 / 533 MHz system bus
| | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
| Memory Type | - DDR2 667/533/400MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
| DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| Memory Voltage | | | | Chipset | - Intel E7230 (Mukilteo) Smithfield chipset
- ICH7R + PXH + Intel® 82573V
| Serial ATA | - Intel® ICH7R SATA controller built-in
- RAID 0, 1, 5, 10
| IPMI | | Network Controllers | - Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa)
- Supports 1000BASE-TX, RJ45 output
| VGA | - On-board ATI RageXL graphics, 8MB
| Super I/O | | | | PCI-Express / PCI-X | - 1 x Universal (SXB-E) slot for
[1 (x4) PCI-E Slot] OR [1x 64-bit PCI-X 133MHz slot] - 1 x 64-bit PCI-X 100MHz slot
- 1 x 1U IPMI Slot
| | | Serial ATA | - Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- IDE Master / Slave 2 ports
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
| LAN | | USB | - 6x USB 2.0 compliant / 1.1 compatible
- 4 internal USB headers
- 2 rear ports
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Ports | - 2x Fast UART 16550 serial header
| | | | | Form Factor | | Model | | | | Height | | Width | | Depth | | Gross Weight | | Available Colors | | | | Buttons | - Power On/Off button
- UID button
| LEDs | - Power / Power Fail LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- UID LED
| Ports | | | | Hot-swap | - 4x 3.5" Hot-swap SATA drive bays
| | | Floppy | - TEAC 3.5" 1.44MB Slim Floppy Drive
| DVD-ROM | - Panasonic Slim 8x DVD-ROM drive
| | | 1x SAS Hard Drive Backplane | | | Fans | - 3x 4cm 12,000 RPM Nidec dual blade fans
| | | 400W (1 + 1) Redundant AC power supply with PFC | AC Voltage | - 100 - 240V, 50-60Hz, 6A-3A Amp
| +5V | | +5V standby | | +12V | | -12V | | +3.3V | | | | CPU | - Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| FAN | - Fan Speed Control
- Total of four proprietary fan headers
- 4 fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
| LED | - CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- Hardware BIOS Virus protection
- USB Keyboard support
| |