 | |
|
| |
| |
|
| | | | Integrated Board | | | | | |
Key Features
1. Single socket H2 (LGA 1155) supports
Intel® Xeon® E3-1200 & v2 series,
2nd Gen Core i3 processors* 2. Intel® C202 PCH Chipset 3. 4x 2.5" Hot-swap SATA2 HDDs (RAID) 4. 1x PCI-E 3.0* x8 FHFL slot 5. Up to 32GB DDR3 ECC 1333MHz /
1600MHz* UDIMMs in 4 sockets 6. Intel® 82579LM and 82574L,
2x Gigabit Ethernet LAN ports 7. IPMI 2.0 on Dedicated LAN 8. 6x SATA 2.0 with RAID 0, 1, 5, 10 9. 330W Gold Level Power Supply 10. Disk-on-module (DOM) power
connector
| | | Available Colors: | Black  |  |
|
 | |
| | | | |
 | | SYS-1017C-TF | - SuperServer 1017C-TF (Black)
| | | | | CPU | - Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors * ^
- Socket H2 (LGA 1155)
| | | | | Memory Capacity | - 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1600*/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | | | Chipset | | | SATA | - 6x SATA 2.0 (3Gbps) w/ RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Dual Intel® 82579LM and 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | VGA | | | Super I/O | | | Clock Generator | | | | | | Serial ATA | - 6 SATA 2.0 (3Gbps) ports
- 6 SATA hard drives supported
| | LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x USB rear ports
- 1x USB Type-A
- 6x USB ports via header
- Total 9 USB 2.0 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| | Ports | - 2x USB & DB9 COM port tray
- (Optional - in place of floppy drive)
| | | | | PCI-Express | - 1x PCI-E 3.0* x8 Full-height Full-length slot
| | | |
| | Hot-swap | - 4x 2.5" Hot-swap SATA2 HDDs with RAID
| | | |
| SAS/SATA HDD Backplane
(SAS support requires optional SAS controller) | | | |
| | Fans | | | | |
| | 330W AC power supply w/ PFC | | AC Voltage | - 100-240 V, 50-60 Hz, 4.5 Amp max
| | +5V | | | +5V standby | | | +12V | - 27 Amp @ 100-180Vac,
31 Amp @ 180-240 Vac | | -12V | | | +3.3V | | | Certification | 
Gold Certified
[ Test Report ] | | | | | BIOS Type | - 8Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | | | |
| |
* BIOS rev. 2.0 or above is needed to support new E3-1200 v2 CPUs, which supports PCI-E 3.0 & DDR3 1600.
^ Per Intel's spec, for platforms using C202/C204 PCH:
1) Intel i5/i7 CPUs are not supported
2) Intel E3-12x5 series processors which have integrated graphics support are not supported |
|
| |
