 | |
 | | SYS-6015TC-TB | - SuperServer 6015TC-TB (Black)
| | | |
| | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300 sequence (Harpertown
/Clovertown processor)
up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz | System Bus | - 1333 / 1066 MHz system bus
| | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | |
| | Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 48 GB 667/533MHz DDR2 ECC Register DIMM memory
- Dual channels memory bus
| | Memory Type | - 677/533MHzECC Register DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® 5100 (San Clemente) chipset
- Intel® ICH9R SB
| | SATA | - Intel ICH9R SB SATAII Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- KVM feature is available with dedicated LAN only
| | Network Controllers | - Intel® 82573V & 82573L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Graphics | - ATI ES1000 controller with 32 MB of video memory
| | Super I/O | | | Clock Generator | | | | |
| | Serial ATA | - Four Serial ATA ports
- Four SATA hard drives supported
| | LAN | | | USB | - 2 rear + 1 Type A connector + 2 headers (2 Ports)
- 5 total USB ports, 2.0 Compliant / 1.1 Compliant
| | VGA | | | Serial Port / Header | - 1 Fast UART 16550 serial port
| | | |
| | BIOS Type | - 16Mb SPI Flash with Phoenix ® BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0/3.0
- USB Keyboard support
- Hardware BIOS Virus protection
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
| | | | | PCI-Express | - 1 (x16) PCI-e slot (Low Profile)
| | | |
| | Hot-swap | - 2x 3.5" SATA Hot-swap drive bays
| | | |
| | 1U SATA Backplane | | | |
| | Fans | | | | |
| | 780W AC to DC power supply w/ PFC | | AC Input | - 100-240V, 60-50Hz, 9.5-3.5Amp
| | +5V sb | | | +12V | - 65 Amp @ 180-240Vac
- 58 Amp @ 100-140Vac
| | | |
| | Software | - Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| | Power Configurations | - ACPI Power Management
- Main Switch Override Mechansim
- Power-on mode for AC power recovery
| | | |
| | CPU | - Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of three 4-pin fans
- 3x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- Suspend-state Indicator LED
| | Other Features | | | | | | Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
