 | |
 | | SYS-6015P-T | - SuperServer 6015P-T (Beige)
| | SYS-6015P-TB | - SuperServer 6015P-TB (Black)
| | | |
| | CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below: - Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz | | System Bus | - 1333 / 1066 / 667 MHz system bus
| | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
| | | |
| | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 32 GB 667/533MHz FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
| | Memory Type | - 667/533MHz FB-DIMM (Fully Buffered DIMM) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
| | | |
| | Chipset | - Intel® 5000P (Blackford) chipset
- MCH + PXH + ESB2
| | SATA | - ESB2 SATA Controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| | IPMI | | | Network Controllers | - Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| | Graphics | - ATI ES1000 controller with 16 MB of video memory
| | Super I/O | | | Clock Generator | | | | |
| | Left Universal Slot | - 1 (x8) PCI-e slot OR
- 1x 64-bit 100MHz PCI-X (3.3V) slot
| | Right Universal Slot | - 1 (x8) PCI-e slot OR
- 1x 64-bit 133MHz PCI-X (3.3V) slot
| | IPMI | - 1 SIM1U Slot (IPMI 2.0)
(Supermicro Intelligent Management) | | | |
| | Serial ATA | - Six Serial ATA ports
- Four SATA hard drives supported
| | IDE | - Single EIDE channels support up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers, 1 dual, 1 single
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 2 Fast UART 16550 serial ports
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- UID button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- UID LED
| | Ports | | | | |
| | Hot-swap | - 4x 3.5" Hot-swap SATA drive bays
| | | |
| | Floppy | - 3.5" 1.44MB Slim Floppy Drive
| | DVD-ROM | | | | |
| SAS/SATA HDD Backplane
(SAS support requires optional SAS controller) | | | |
| | Fans | - 4x 6-pin Counter-rotating Cooling Fans
| | | |
| | 700W AC-DC power supply and power distributor w/ PFC | | AC Input | - 100 - 240V, 60-50Hz, 10 - 4 Amp
| | +5V standby | | | +12V | | | With Power Distributor | - +5V: 24 Amp
- +3.3V: 21 Amp
- -12V: 0.6 Amp
| | | |
| | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby, VBAT
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
| | FAN | - Total of ten proprietary fan headers for up to ten fans
- Ten fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
| | | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Fan Speed Control
| | | |
| Environmental Specifications | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing) | |
